Passa al contenuto
Merck
Tutte le immagini(2)

Key Documents

Altri documenti

244619

Sigma-Aldrich

Zinc selenide

powder, 10 μm, 99.99% trace metals basis

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Tutte le immagini(2)

About This Item

Formula condensata:
ZnSe
Numero CAS:
1315-09-9
Peso molecolare:
144.35
Numero CE:
215-259-7
Numero MDL:
MFCD00011296
Codice UNSPSC:
12352300
ID PubChem:
24854688
NACRES:
NA.23

Grado

deposition grade

Saggio

99.99% trace metals basis

Forma fisica

powder

Dimensione particelle

10 μm

Densità

5.42 g/mL at 25 °C (lit.)

applicazioni

battery manufacturing

Stringa SMILE

[Zn]=[Se]

InChI

1S/Se.Zn
SBIBMFFZSBJNJF-UHFFFAOYSA-N

Cerchi prodotti simili? Visita Guida al confronto tra prodotti

Categorie correlate

Avvertenze

Danger

Indicazioni di pericolo

H301 + H331,H373,H410

Classi di pericolo

Acute Tox. 3 Inhalation - Acute Tox. 3 Oral - Aquatic Acute 1 - Aquatic Chronic 1 - STOT RE 2

Codice della classe di stoccaggio

6.1B - Non-combustible acute toxic Cat. 1 and 2 / very toxic hazardous materials

Classe di pericolosità dell'acqua (WGK)

WGK 3

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable

Dispositivi di protezione individuale

Eyeshields, Faceshields, Gloves, type P2 (EN 143) respirator cartridges

Certificati d'analisi (COA)

Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

I clienti hanno visto anche

Slide 1 of 6

1 of 6

Zinc sulfide powder, 10 μm, 99.99% trace metals basis

Sigma-Aldrich

244627

Zinc sulfide

Zinc sulfide purum, 97% (from Zn)

Sigma-Aldrich

14459

Zinc sulfide

Bathocuproine sublimed grade, 99.99% trace metals basis

Sigma-Aldrich

699152

Bathocuproine

[6,6]-Phenyl C61 butyric acid methyl ester >99.5%

Sigma-Aldrich

684449

[6,6]-Phenyl C61 butyric acid methyl ester

Lithium fluoride ≥99.99% trace metals basis

Sigma-Aldrich

449903

Lithium fluoride

Lead(II) iodide 99.999% trace metals basis

Sigma-Aldrich

203602

Lead(II) iodide

Meng-Yu Chen et al.
Nanoscale, 5(1), 363-368 (2012-11-23)
A novel one-step cation exchange approach has been developed to prepare ZnO-decorated ZnSe nanorods (ZnSe-ZnO NRs), a prototype type-II semiconductor nanoheterostructure. Because of the staggered band offset which promoted effective charge separation, the as-synthesized ZnSe-ZnO NRs exhibited remarkable photocatalytic activities
Evgeni Sorokin et al.
Optics express, 20(27), 28947-28952 (2012-12-25)
We report self-starting femtosecond operation of a 180-MHz SESAM-controlled prismless Cr:ZnS laser around 2400 nm at open air and room temperature. Dispersion compensation was achieved by a combination of bulk materials and chirped mirrors. Both soliton- and chirped-pulse operation regimes
Damian W Synnott et al.
Nanotechnology, 24(4), 045704-045704 (2013-01-10)
A novel ambient pressure microwave assisted technique is developed in which silver and indium-modified ZnS is synthesized. The as-prepared ZnS is characterized by x-ray diffraction, UV-vis spectroscopy, x-ray photoelectron spectroscopy and luminescence spectroscopy. This procedure produced crystalline materials with particle
Jun Wang et al.
Biosensors & bioelectronics, 41, 143-149 (2012-09-11)
The fluorescence emission intensity of ZnSe quantum dots (QDs) conjugated to proteins to form QD-based biomolecular sensors increases significantly upon binding of the sensors to target proteins in solution. This phenomenon enables the development of homogeneous, separation-free immunoassays for rapid
Hyunchul Jung et al.
Journal of nanoscience and nanotechnology, 12(7), 5407-5411 (2012-09-13)
White light-emitting diodes (LEDs) were fabricated using GaN-based 380-nm UV LEDs precoated with the composite of blue-emitting polymer (poly[(9,9-dihexylfluorenyl-2,7-diyl)-alt-co-(2-methoxy-5-{2-ethylhexyloxy)-1 ,4-phenylene)]), yellow green-emitting polymer (poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-{2,1',3}-thiadiazole)]), and 605-nm red-emitting quantum dots (QDs). CdSe cores were obtained by solvothermal route using CdO, Se
Visualizza tutti i documenti correlati

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.