1.52062
Chromolith® RP-18 endcapped (monolithic) HPLC Columns
L × I.D. 50 mm x 2 mm HPLC Columns Validation Kit (3 Columns from 3 different batches)
Sinônimo(s):
Chromolith® RP-18 endcapped 50-2 HPLC columns Validation Kit (3 columns from 3 different batches)
About This Item
Produtos recomendados
Nome do produto
Chromolith® RP-18 com substituição dos grupos silanol (endcapped), L × I.D. 50 mm x 2 mm HPLC columns Validation Kit (3 columns from 3 different batches)
Materiais
PEEK column
Nível de qualidade
Agency
suitable for USP L1
linha de produto
Chromolith®
Características
endcapped
embalagem
pkg of 3 ea
Extensão da rotulagem
18% Carbon loading
Parâmetros
200 bar pressure
45 °C max. temp.
técnica(s)
LC/MS: suitable
UHPLC-MS: suitable
UHPLC: suitable
mass spectrometry (MS): suitable (High)
coluna C × D.I.
5 cm × 2 mm
Matriz
monolithic silica
Grupo ativo da matriz
C18 bonding phase
tamanho de poro
1.5 μm macroporosity
13 nm mesoporosity
Faixa de pH operacional
2-7.5
técnica de separação
reversed phase
temperatura de armazenamento
no temp limit
Procurando produtos similares? Visita Guia de comparação de produtos
Categorias relacionadas
Descrição geral
Chromolith® columns are made of monolithic silica with a characteristic bimodal pore structure.
Chromolith® RP-18 endcapped 50-2 columns have macropores with 1.5 μm diameter, giving a column efficiency exceeding 100,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith® RP-18 endcapped 50-2 columns fall under the USP L1 Classification. The column efficiency is comparable to a 3-4 μm particle size fully porous particulate column. Chromolith® RP-18 endcapped 50-2 columns are perfectly suitable for LC-MS applications.
The column dimension of 50 mm length and 2 mm I.D. is the best choice for fast separations on any U/HPLC System.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity
The recommended Guard-columns are:
Chromolith® RP-18 endcapped 5-2 guard cartridges (3 pieces) [1.52009] with the Chromolith® Guard Cartridge Holder (kit) 5 mm x 2 mm [1.52004]
The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
All Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument
Informações legais
produto relacionado
Certificados de análise (COA)
Busque Certificados de análise (COA) digitando o Número do Lote do produto. Os números de lote e remessa podem ser encontrados no rótulo de um produto após a palavra “Lot” ou “Batch”.
Já possui este produto?
Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.
Artigos
Monolithic silica HPLC columns enable high-throughput analysis at low back pressure without loss of separation efficiency or peak capacity.
Chromolith® HPLC and UHPLC columns are made from monolithic silica with a bimodal pore structure using sol-gel technology.
Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.
Entre em contato com a assistência técnica