1.17349
MAS-100 Atmos® Gas Exhaust Tube Set
for use with MAS-100 Atmos®
Faça loginpara ver os preços organizacionais e de contrato
About This Item
Código UNSPSC:
41103403
NACRES:
NA.74
Produtos recomendados
Materiais
PVC tubing
stainless steel adapter
Características
autoclavable
fabricante/nome comercial
MAS-100 Atmos®
C tubulação
5.0 m
aplicação(ões)
compressed gas monitoring
cosmetics
food and beverages
pharmaceutical
compatibilidade
for use with MAS-100 Atmos®
Descrição geral
The MAS-100 Atmos® Gas Exhaust Tube Set is an accessory for MAS-100 Atmos® Microbial Compressed Gas Sampler for safe sampling of gases and prevent intoxication or contamination of the environment.
In case, if only the adapter for gas exhaust tubing (product 1.17348) is required for an alternative tubing, it must be ensured that the tubing that is used has a minimum inner diameter of 32 mm and a maximum length of 5 m. These are the conditions validated by the manufacturer.
The connector piece of the Gas Exhaust Tube is connected to the exhaust of the MAS-100 Atmos® instrument. The tubing is fixed to the connector with the tri-clamp. The end of the tubing is open and can be adapted on site to the respective application.
The tubing can be disinfected by spray or wipe disinfection with 70% ethanol or 70% IPA. The stainless-steel connector itself can be autoclaved at ? 134°C for 5mins or 121°C for 20 min.
In case, if only the adapter for gas exhaust tubing (product 1.17348) is required for an alternative tubing, it must be ensured that the tubing that is used has a minimum inner diameter of 32 mm and a maximum length of 5 m. These are the conditions validated by the manufacturer.
The connector piece of the Gas Exhaust Tube is connected to the exhaust of the MAS-100 Atmos® instrument. The tubing is fixed to the connector with the tri-clamp. The end of the tubing is open and can be adapted on site to the respective application.
The tubing can be disinfected by spray or wipe disinfection with 70% ethanol or 70% IPA. The stainless-steel connector itself can be autoclaved at ? 134°C for 5mins or 121°C for 20 min.
Aplicação
MAS-100 Atmos® Microbial Compressed Gas Sampler is used to sample pre-defined compressed gases like argon, carbon dioxide, compressed air, and nitrogen from pharmaceutical, cosmetic, food & beverage industry.
Características e benefícios
- Removes potentially toxic gas out of the sampling environment.
- 5 m distance between instrument exhaust and room exhaust.
Componentes
The MAS-100 Atmos® Gas Exhaust Tube Set consists of:
- 5m PVC Tube.
- Stainless Steel Connector.
- Tri-clamp (50.5mm)
- Silicone Gasket.
Informações legais
MAS-100 Atmos is a registered trademark of MBV AG
produto relacionado
Certificados de análise (COA)
Busque Certificados de análise (COA) digitando o Número do Lote do produto. Os números de lote e remessa podem ser encontrados no rótulo de um produto após a palavra “Lot” ou “Batch”.
Já possui este produto?
Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.
Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.
Entre em contato com a assistência técnica