739340
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)
0.54% in H2O, high-conductivity grade
Sinônimo(s):
Orgacon™ S305, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
Faça loginpara ver os preços organizacionais e de contrato
About This Item
Número MDL:
Código UNSPSC:
12352103
Produtos recomendados
grau
high-conductivity grade
forma
liquid
contém
1-5% Propan-2-ol
5-10% Diethylene glycol
concentração
0.54% in H2O
resistência
<200 Ω/sq, >90% visible light transmission (40 μm wet)
índice de refração
n20/D 1.344
pH
<2.7
viscosidade
<18 cP(22 °C)
densidade
0.983 g/mL at 25 °C
Procurando produtos similares? Visita Guia de comparação de produtos
Descrição geral
A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivityand good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.
Aplicação
Aqueous formulation of high conductivity grade PEDOT:PSS polymer dispersion suitable for transparent conductive coatings. Includes PEDOT:PSS and surfactants.
Used in ITO-free OPV applications as a highly conductive hole transport layer. Also can be used for optical films, touch pads, touch screen displays, flexible LCDs, and e-paper applications.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Informações legais
Product of Agfa-Gevaert N.V.
Orgacon is a trademark of Agfa-Gevaert N.V.
substituído por
Nº do produto
Descrição
Preços
Código de classe de armazenamento
10 - Combustible liquids
Classe de risco de água (WGK)
WGK 2
Ponto de fulgor (°F)
Not applicable
Ponto de fulgor (°C)
Not applicable
Escolha uma das versões mais recentes:
Já possui este produto?
Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.
Solar cells made from polymers containing Dithieno [3, 2-b: 2', 3'-d] pyrrole with different side chain lengths
Gong C, et al.
Solar Energy Mat. and Solar Cells, 95(3), 969-973 (2011)
Structure and electronic properties of poly(3,4-ethylenedioxythiophene) poly(styrene sulfonate) prepared under ultrasonic irradiation
Posudievsky OYu, et al.
Synthetic Metals, 195, 335-339 (2014)
SURPRISING IMPACT OF SMALL ELECTRIC AND MAGNETIC FIELDS ON CONDUCTING POLYMERS
Epstein AJ, et al.
Polymer Preprints (American Chemical Society, Division of Polymer Chemistry), 48(1), 119-119 (2007)
Mou Pal et al.
Nanoscale research letters, 7(1), 1-1 (2012-01-05)
Uniform, spherical-shaped TiO2:Eu nanoparticles with different doping concentrations have been synthesized through controlled hydrolysis of titanium tetrabutoxide under appropriate pH and temperature in the presence of EuCl3·6H2O. Through air annealing at 500°C for 2 h, the amorphous, as-grown nanoparticles could
Simple casting based fabrication of PEDOT:PSS-PVDF-ionic liquid soft actuators
Simaite A, et al.
SPIE Proc. null
Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.
Entre em contato com a assistência técnica