Skip to Content
Merck
All Photos(1)

Key Documents

901773

Sigma-Aldrich

Silver/silver chloride (60/40) paste for screen printing

Synonym(s):

Ag/AgCl paste, C2130809D5, conductive ink

Sign Into View Organizational & Contract Pricing
All Photos(1)

About This Item

Linear Formula:
Ag/AgCl
UNSPSC Code:
12141740
NACRES:
NA.23

description

Coverage: 200 cm2 per g (using a 156 mesh polyester screen)
Sheet resistivity:<100 miliohms per square (20 micron thick printed on alumina substrate)

form

paste

viscosity

2.0-5.5 Pa.s (Haake RS1 C20/2° TiL at 230 sec-1 at 25°C)

General description

This product has a ratio of silver to silver chloride of 60/40.

Application

  • Highly sensitive determination of heavy metals in water prior to and after remediation using Citrofortunella Microcarpa: This study utilizes Silver-silver chloride (Ag/AgCl) Paste (60:40) in screen printing electrodes for environmental monitoring applications (Palisoc et al., 2021).
  • Screen-printed graphite electrodes as low-cost devices for oxygen gas detection in room-temperature ionic liquids: This research incorporates a silver/silver chloride reference electrode by screen-printing Ag/AgCl paste (60:40) onto a flexible film, exploring its effectiveness in gas sensing technologies (Lee et al., 2017).
  • Simple Portable Voltammetric Sensor Using Anodized Screen-Printed Graphene Electrode for the Quantitative Analysis of p-Hydroxybenzoic Acid in Cosmetics: In this study, silver/silver chloride paste (Ag/AgCl: 60/40) was used to enhance the functionality of screen-printed electrodes for cosmetic analysis (Charoenkitamorn et al., 2022).
  • Dipstick Sensor Based on Molecularly Imprinted Polymer-Coated Screen-Printed Electrodes for Single-Shot Detection of Glucose in Urine Samples: This research features the use of silver/silver chloride (60:40) reference electrode, screen-printed onto plastic for biomedical applications (Caldara et al., 2023).
  • Simultaneous determination of ascorbic acid, dopamine, and uric acid using graphene quantum dots/ionic liquid modified screen-printed carbon electrode: Utilizes carbon ink and silver/silver chloride (Ag/AgCl) paste 60/40 for developing advanced sensor platforms (Kunpatee et al., 2020).

Features and Benefits

Product Benefits
  • Applications in medical diagnostics, environmental sensors
  • High conductivity
  • Low curing temperature

Preparation Note

PROCESSING

  • Screen Printing Equipment: semi-automatic, manual

  • Ink Screen Life: >3 hours

  • Screen Types: polyester, mesh 156 to 230 tpi

Note: Stainless Steel mesh is not recommended, since a paste component can become corrosive in the presence of moisture.Also, plastic palette knives should be used instead of metal knives.

  • Typical Drying Conditions: Dry at 60°C for 30minutes or 80°C for 10minutes in a box oven.

  • Clean up solvent: ethoxyl propanol or seriocol

  • Substrate: polyester, PVC, polycarbonate and alumina

Legal Information

Product of Gwent Electronic Materials Ltd (GEM), part of Sun Chemical Corporation

Pictograms

CorrosionEnvironment
GHS05,GHS09

Signal Word

Warning

Hazard Statements

H290,H410

Precautionary Statements

P234 - P273 - P390 - P391 - P501

Hazard Classifications

Aquatic Acute 1 - Aquatic Chronic 1 - Met. Corr. 1

Storage Class Code

8A - Combustible corrosive hazardous materials

WGK

WGK 3

Flash Point(F)

192.2 °F

Flash Point(C)

89 °C

Choose from one of the most recent versions:

Certificates of Analysis (COA)

Lot/Batch Number
MKCP9046
MKCP8908
MKCN7533
MKCN7532
MKCM7692

Don't see the Right Version?

If you require a particular version, you can look up a specific certificate by the Lot or Batch number.

Search for a COA

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

A review of screen-printed silver/silver chloride (Ag/AgCl) reference electrodes potentially suitable for environmental potentiometric sensors.
Sophocleous M and Atkinson J K
Sensors and actuators A, Physical, 267, 106-120 (2017)
Fabrication of thick film sensitive RuO2-TiO2 and Ag/AgCl/KCl reference electrodes and their application for pH measurements.
Libu M, et al.
Sensors and Actuators B, Chemical, 204, 57-67 (2014)
Screen printed potentiometric sensor for non-invasive measurement of blood urea in human subjects using reverse iontophoresis.
Varadharaj E K and Jampana N
Electrochemical Society Transactions, 66, 1-22 (2015)

Articles

Advancements in the Fabrication of Integrated Organic Electronics

Professor Tokito and Professor Takeda share their new materials, device architecture design principles, and performance optimization protocols for printed and solution-processed, low-cost, highly flexible, organic electronic devices.

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service