Saltar al contenido
MilliporeSigma

791989

Sigma-Aldrich

PDPP2T-TT-OD

Sinónimos:

Diketopyrrolopyrrole - thienothiophene copolymer, Diketopyrrolopyrrole p-type semiconductor, Xerox XSC4p

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
(C60H90N2O2S4)n
Número de CAS:
UNSPSC Code:
12352103
NACRES:
NA.23

form

solid

mol wt

average Mw 40,000-60,000 by GPC

color

dark blue

mp

>200 °C

λmax

820 nm (thin film)

orbital energy

HOMO 5.2 eV 

OFET device performance

Bottom gate top contact device with silane modified SiO2 dielectric.Processing method spin coating; thermal annealing at 140 °C/ 10 min

  • Semiconductor Type:
  • Mobility: 0.60 cm2/V·s
  • On/Off Ratio: 10^6 - 10^7

PDI

2.5‑3.0

General description

PDPP2T-TT-OD is thiophene based conducting polymer with diketopyrrolo-pyrrole (DPP) as the electron deficient group and octyldodecyl acting as a pendant attachment. Its structure has a DPP-thiophene and a variable bithiophene (2T). It has a high charge carrying mobility that makes it useful in the development of organic electronics based devices.

Application

PDPP2T-TT-OD can be used as a π-conjugating polymer that can be used in the fabrication of a variety of devices such as organic thin film transistors (OTFTs), photovoltaic cells, polymeric solar cells and field effect transistors (FETs).
Xerox demonstrated device performance on a n-doped silicon wafer with 100 - 300 nm native SiO2 dielectric modified with an octadecyltrichlorosilane self-assembled
monolayer. An XSC4p film was deposited by spin-coating a 0.5 – 0.7 wt. % polymer solution at 1000 rpm for 60 sec. The film was dried in a vacuum oven for 10 min at 80
°C and then thermally annealed at 140 °C for 10 min. Gold source-drain electrodes were deposited by vacuum evaporation using a shadow mask (90 micrometer channels).
The electrical performance was characterized using a Keithley SCS-4200 system. The reported mobility is the average saturated mobility of four devicεs ± the standard
deviation.

Legal Information

Product of Xerox®. Xerox® is a registered trademark of Xerox Corporation.
Xerox is a registered trademark of Xerox Corporation

pictograms

Exclamation mark

signalword

Warning

Hazard Classifications

Eye Irrit. 2 - Skin Irrit. 2 - STOT SE 3

target_organs

Respiratory system

Storage Class

11 - Combustible Solids

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Xinran Zhang et al.
Journal of the American Chemical Society, 133(38), 15073-15084 (2011-08-06)
We describe a series of highly soluble diketo pyrrolo-pyrrole (DPP)-bithiophene copolymers exhibiting field effect hole mobilities up to 0.74 cm(2) V(-1) s(-1), with a common synthetic motif of bulky 2-octyldodecyl side groups on the conjugated backbone. Spectroscopy, diffraction, and microscopy
Universal correlation between fibril width and quantum efficiency in diketopyrrolopyrrole-based polymer solar cells
Li W, et al.
Journal of the American Chemical Society, 135(50), 18942-18948 (2013)
Weiwei Li et al.
Advanced materials (Deerfield Beach, Fla.), 25(23), 3182-3186 (2013-03-07)
A high-molecular-weight conjugated polymer based on alternating electron-rich and electron-deficient fused ring systems provides efficient polymer solar cells when blended with C60 and C70 fullerene derivatives. The morphology of the new polymer/fullerene blend reduces bimolecular recombination and allows reaching high
Molecular packing of high-mobility diketo pyrrolo-pyrrole polymer semiconductors with branched alkyl side chains
Zhang X, et al.
Journal of the American Chemical Society, 133(38), 15073-15084 (2011)
Copolymers of diketopyrrolopyrrole and thienothiophene for photovoltaic cells
Bijleveld JC, et al.
Journal of Materials Chemistry, 21(25), 9224-9231 (2011)

Artículos

The development of high-performance conjugated organic molecules and polymers has received widespread attention in industrial and academic research.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico