Skip to Content
MilliporeSigma
  • State of Supported Nickel Nanoparticles during Catalysis in Aqueous Media.

State of Supported Nickel Nanoparticles during Catalysis in Aqueous Media.

Chemistry (Weinheim an der Bergstrasse, Germany) (2015-09-26)
Zizwe A Chase, Stanislav Kasakov, Hui Shi, Aleksei Vjunov, John L Fulton, Donald M Camaioni, Mahalingam Balasubramanian, Chen Zhao, Yong Wang, Johannes A Lercher
ABSTRACT

The state of Ni supported on HZSM-5 zeolite, silica, and sulfonated carbon was studied during aqueous-phase catalysis of phenol hydrodeoxygenation using in situ extended X-ray absorption fine structure spectroscopy. On sulfonated carbon and HZSM-5 supports, NiO and Ni(OH)2 were readily reduced to Ni(0) under reaction conditions (≈35 bar H2 in aqueous phenol solutions containing up to 0.5 wt. % phosphoric acid at 473 K). In contrast, Ni supported on SiO2 was not stable in a fully reduced Ni(0) state. Water enables the formation of Ni(II) phyllosilicate, which is more stable, that is, difficult to reduce, than either α-Ni(OH)2 or NiO. Leaching of Ni from the supports was not observed over a broad range of reaction conditions. Ni(0) particles on HZSM-5 were stable even in presence of 15 wt. % acetic acid at 473 K and 35 bar H2 .

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Ethyl alcohol, Pure, 190 proof, meets USP testing specifications
Sigma-Aldrich
Nickel(II) nitrate hexahydrate, 99.999% trace metals basis
Sigma-Aldrich
Phenol, ≥99%
Sigma-Aldrich
Ethyl alcohol, Pure, 190 proof, ACS spectrophotometric grade, 95.0%
Sigma-Aldrich
Phenol, unstabilized, ReagentPlus®, ≥99%
Sigma-Aldrich
Borane triethylamine complex, 97%
Sigma-Aldrich
Oleic acid, natural, FCC
Sigma-Aldrich
Oleylamine, technical grade, 70%
Sigma-Aldrich
Phenol, contains hypophosphorous as stabilizer, loose crystals, ACS reagent, ≥99.0%
Supelco
Phenol solution, 5000 μg/mL in methanol, certified reference material
Sigma-Aldrich
Phosphoric acid-16O4 solution, 70 wt. % in D2O, 99.9 atom % 16O
Sigma-Aldrich
Hexane, suitable for HPLC
Sigma-Aldrich
Ethanol, ≥99.5%, suitable for absorption spectrum analysis
Sigma-Aldrich
Hexane, for residue analysis, JIS 5000
Sigma-Aldrich
Ethanol, ≥99.5%, suitable for HPLC
Sigma-Aldrich
Phenol, SAJ first grade, ≥98.0%
Sigma-Aldrich
Ethanol, ≥99.5%, suitable for fluorescence
Sigma-Aldrich
Ethanol, JIS 300, ≥99.5%, for residue analysis
Sigma-Aldrich
Ethanol, ≥99.5%, SAJ super special grade
Sigma-Aldrich
Hexane, JIS 1000, ≥96.0%, for residue analysis
Sigma-Aldrich
Ethanol, JIS 1000, ≥99.5%, for residue analysis
Sigma-Aldrich
Phenol, JIS special grade, ≥99.0%
Sigma-Aldrich
Hexane, JIS special grade, ≥96.0%
Sigma-Aldrich
Ethanol, ≥99.5%
Sigma-Aldrich
Hexane, SAJ first grade, ≥95.0%
Sigma-Aldrich
Phenol, ≥99.0%
Sigma-Aldrich
Oleic acid, SAJ first grade, ≥70.0%
Sigma-Aldrich
Hexane, JIS 300, ≥96.0%, for residue analysis
Sigma-Aldrich
Phenol, ≥99.0%
Sigma-Aldrich
Hexane, ≥96.0%, suitable for residual phthalate analysis