MX680S50

Mix-n-Stain^™ CF^™ 680 Antibody Labeling Kit (20-50μg)

• Kod UNSPSC: 12352203
• NACRES: NA.41

Właściwości

• Postać: liquid
• warunki przechowywania: protect from light
• fluorescencja: λ_ex 681 nm; λ_em 698 nm
• temp. przechowywania: −20°C

Opis

Opis ogólny

This labeling kit is for labeling 20-50 μg antibody with the far red fluorescent dye CF680. Mix-n-Stain CF dye antibody labeling kits are a revolutionary antibody labeling technology that permits one to label antibodies with our superior CF dyes in 30 minutes without a purification step. The labeling procedure tolerates many common buffer components and antibody stabilizers. CF680 is one of the outstanding near-IR dyes excitable at about 680 nm with emission at about 700 nm. CF680 is a highly water-soluble cyanine-based dye that is excellent for labeling antibodies, producing the brightest fluorescence and highest signal-to-noise ratio in immunostaining among spectrally similar dyes, such as Cy^® 5.5, Alexa Fluor^™ 680, DyLight^® 680 and IRDye^® 680. CF680 is ideal for detection applications such as near-IR Western blotting and in vivo imaging.

Zastosowanie

The Mix-n-Stain CF dye antibody labeling kit can be used to label primary antibody for ELISA, western blot, immunohistochemistry, flow cytometry, immunofluorescence or immunocytochemistry applications.

Cechy i korzyści

Mix-n-Stain CF dye antibody labeling kits dramatically simplify the process of preparing fluorescently labeled antibodies, particularly primary antibodies. Simply mix your antibody with a CF dye of your choice in the buffer provided, a step that takes less than 30 seconds of hands-on time. After waiting for another 30 minutes, without a separation step, you will have a fluorescent antibody conjugate that is as good as the best pre-labeled fluorescent antibody you can buy from some of the leading suppliers. There is no need to calculate how much dye you should use; just mix your antibody with the entire amount of dye provided and you will always produce optimal labeling. Moreover, the labeling reaction can tolerate the presence of common stabilizers, such as sodium azide, Tris, glycerol and low level of BSA.

Komponenty

The kit consists of 1 vial each of Mix-n-Stain Dye, Mix-n-Stain Reaction Buffer (10x), Mix-n-Stain Storage Buffer, and an ultrafiltration vial.

Komentarz do analizy

Direct replacement for: Alexa Fluor^™ 680, Cy^®5.5, DyLight^® 680, IRDye^® 680LT

Informacje prawne

This product is distributed by Sigma-Aldrich Co. under the authorization of Biotium, Inc. This product is covered by one or more US patents and corresponding patent claims outside the US patents or pending applications owned or licensed by Biotium, Inc. including without limitation: 12/334,387; 12/607,915; 12/699,778; 12/850,578; 61/454,484. In consideration of the purchase price paid by the buyer, the buyer is hereby granted a limited, non-exclusive, non-transferable license to use only the purchased amount of the product solely for the buyer′s own internal research in a manner consistent with the accompanying product literature. Except as expressly granted herein, the sale of this product does not grant to or convey upon the buyer any license, expressly, by implication or estoppel, under any patent right or other intellectual property right of Biotium, Inc. Buyer shall not resell or transfer this product to any third party, or use the product for any commercial purposes, including without limitation, any diagnostic, therapeutic or prophylactic uses. This product is for research use only. Any other uses, including diagnostic uses, require a separate license from Biotium, Inc. For information on purchasing a license to use this product for purposes other than research, contact Biotium, Inc., 3159 Corporate Place, Hayward, CA 94545, Tel: (510) 265-1027. Fax: (510) 265-1352. Email: btinfo@biotium.com.

ALEXA FLUOR is a trademark of Life Technologies

CF is a trademark of Biotium, Inc.

Cy is a registered trademark of Cytiva

DyLight is a registered trademark of Pierce Biotechnology, Inc.

IRDye is a registered trademark of LI-COR, Inc.

Mix-n-Stain is a trademark of Biotium, Inc.

Oświadczenie o zrzeczeniu się odpowiedzialności

Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.

This page may contain text that has been machine translated.

Informacja o środkach bezpieczeństwa

• Piktogramy: GHS05
• Hasło ostrzegawcze: Warning
• Zwroty wskazujące rodzaj zagrożenia: H290,H412
• Zwroty wskazujące środki ostrożności: P234 - P273 - P390 - P501
• Klasyfikacja zagrożeń: Aquatic Chronic 3 - Met. Corr. 1
• Kod klasy składowania: 8A - Combustible corrosive hazardous materials
• Temperatura zapłonu (°F): Not applicable
• Temperatura zapłonu (°C): Not applicable