MPHL02GH2

Durapore^® 0.45 µm, Millipak^® Capsule

sterile, Millipak^® 20

• Synonim(y): Sterile Millipak-20 Filter Unit 0.45 μm 1/4 in. HB/HB w/bell
• Kod UNSPSC: 23151806
• eCl@ss: 32031690
• NACRES: NB.24

Właściwości

• Materiały: PVDF membrane; PVDF vent cap; polycarbonate ; polycarbonate support
• Poziom jakości: 400
• sterylność: irradiated; sterile
• linia produktu: Millipak^® 20
• Właściwości: hydrophilic
• producent / nazwa handlowa: Millipak^®
• Parametry: 0.35 bar max. differential pressure (5 psid) at 123 °C (Forward); 0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse); 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward); 10 L process volume; 4.1 bar max. differential pressure (60 psid) at 25 °C (Forward); 5.2 bar max. inlet pressure (75 psi) at 25 °C; 6.4 L/min flow rate at 2.45 bar (ΔP)
• metody: bioburden reduction: suitable
• powierzchnia filtracyjna: 100 cm²
• śr. przyłącza doprowadzającego: 1/4 in.
• śr. przyłącza odprowadzającego: 1/4 in.
• zanieczyszczenia: ≤0.5 EU/mL (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• substancje ekstrahujące się grawimetrycznie: ≤1 mg/device
• macierz: Durapore^®
• wielkość porów: 0.45 μm
• punkt pęcherzykowania: ≥1790 mbar (26 psig), air with water at 23 °C
• dopasowywanie: inlet hose barb; outlet hose barb (with bell); (6 mm (1/4 in.) Hose Barb Inlet and Outlet with filling bell)
• Warunki transportu: ambient

Opis

Opis ogólny

Device Configuration: Gamma Gold Capsule

Opakowanie

Blister

Inne uwagi

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore^® Membrane user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Uwaga dotycząca przygotowania

Sterilization Method
3 autoclave cycles of 90 min @ 123 °C; not in-line steam sterilizable

This product was manufactured with a Durapore^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Komentarz do analizy

Gravimetric Extractables: using sterilized device after a 200 mL flush and 24 hours in water at controlled room temperature

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥200 mL

Informacje prawne

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

This page may contain text that has been machine translated.