CHGE73TS3

Millipore Express^® SHC, Cartridge

pore size 0.5/0.2 μm, cartridge nominal length 30 in. (75 cm), Code 7, silicone seal

• Synonim(y): Millipore Express SHC Cartridge Filter 30 in. 0.5/0.2 μm Code 7 Silicone
• Kod UNSPSC: 23151806
• eCl@ss: 32031690

Właściwości

• Materiały: polyethersulfone ; polypropylene ; polypropylene support; polysulfone ; silicone seal
• Poziom jakości: 400
• zgodność regionalna: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• sterylność: non-sterile
• Kompatybilność ze sterylizacją: autoclavable compatible; steam-in-place compatible
• linia produktu: EMPROVE^® Filter; Millipore Express^®
• Właściwości: hydrophilic
• producent / nazwa handlowa: Millipore Express^®
• Parametry: ≤84.5 mL/min air diffusion at 23 °C; 0.07 bar max. inlet pressure (1 psi) at 135 °C (Reverse); 1.0 bar max. inlet pressure (15 psi) at 135 °C (Forward); 1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward); 1700 bar max. differential pressure (25 psi) at 80 °C (forward); 2.07 bar max. inlet pressure (30 psi) at 25 °C (Reverse); 2100 mbar max. differential pressure (30 psi) at 25 °C (reverse); 340 mbar max. differential pressure (5 psi) at 135 °C (forward); 69 mbar max. differential pressure (1 psi) at 135 °C (reverse); 6900 mbar max. differential pressure (100 psi) at 25 °C (forward); 7 bar max. inlet pressure (100 psi) at 25 °C (Forward)
• metody: sterile filtration: suitable
• Długość: 30 in.
• Szerokość: 2.7 in.
• długość nominalna kartridża: 30 in. (75 cm)
• Średnica: 6.9 cm (2.7 in.)
• powierzchnia filtracyjna: 1.44 m²
• zanieczyszczenia: ≤0.25 EU/mL (LAL test, Aqueous extraction); <0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• macierz: Millipore Express^® SHC
• pore size: 0.5/0.2 μm pore size
• moc wejściowa: sample type liquid
• punkt pęcherzykowania: ≥4000 mbar (58 psig), air with water at 23 °C
• kod wkładu: Code 7

Opis

Opis ogólny

Millipore Express^® SHC filters have an on-board polyethersulfone membrane prefilter which protects the 0.2 μm membrane from premature plugging and extends filtration capacity, so you get sterilizing-grade performance with superior throughput. The CHGE73TS3 filter features a 0.5/0.2 μm pore size, a filtration area of 1.47 m² and a Code 7 cartridge configuration.

Millipore Express^® SHC filters provide you with a single solution for a range of process fluids, minimizing validation efforts and simplifying filter inventory and stocking requirements. With Millipore Express^® SHC filters, you increase productivity, shorten cycle-time and reduce cost.

Zastosowanie

• Media additives
• Column protection
• Concentrated protein streams
• Cell harvest (post clarification)
• Caustics/pH adjusters
• Buffers
• CIP solution

Cechy i korzyści

• High capacity, high flux hydrophilic PES membranes
• Validated sterilizing-grade performance
• Easy wetting and integrity testing
• Superior throughput in high fouling streams, including media and protein containing solutions
• Increased capacity for improved process efficiency and economy
• Broad chemical compatibility across a wide pH range (1-14) — caustic compatible

Inne uwagi

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer wetting instructions of Filters with MILLIPORE EXPRESS^® Membrane user guide
• Storage Statement: Please refer Filters with MILLIPORE EXPRESS^® Membrane user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informacje prawne

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany

This page may contain text that has been machine translated.