1.46628

Sterile Isopropyl Myristate (IPM)

ready-to-use, bottle volume 360 mL , filling volume

• Synonim(y): Isopropylmyristate, Isopropylmyristate, Tetradecanoic acid isopropyl ester, Myristic acid isopropyl ester, Sterile IPM, Tetradecanoic acid isopropyl ester, Myristic acid isopropyl ester
• Wzór empiryczny (zapis Hilla): C₁₇H₃₄O₂
• Numer CAS: 110-27-0
• Masa cząsteczkowa: 270.45
• Numer MDL: MFCD00008982
• Kod UNSPSC: 41106214
• Numer indeksu EC: 203-751-4
• NACRES: NA.74

Właściwości

• agency: EP 2.6.13; JP 4.06; USP 71
• Poziom jakości: 300
• ciśnienie pary: <1 hPa ( 20 °C)
• opis: Suitable for dilution of viscous products to facilitate membrane filtration
• sterylność: sterile; γ-irradiated
• Postać: liquid
• temp. samozapłonu: >300 °C
• okres trwałości: 12 mo.
• Właściwości: closure type crimp cap with septum; ready-to-use
• opakowanie: bottle of ; pkg of (360 ml in 500 ml bottle with red flip cap and septum (6 bottles per box))
• pojemność butelki: 500 mL
• objętość butelki: 360 mL , filling volume
• tw: 140 °C/3 hPa
• temp. przejścia: flash point >150 °C
• rozpuszczalność: <0.05 mg/L
• gęstość: 0.85 g/cm³ at 20 °C
• Zastosowanie: cosmetics; food and beverages; pharmaceutical; sterility testing
• temp. przechowywania: 15-25°C
• przydatność: nonselective for
• InChI: 1S/C17H34O2/c1-4-5-6-7-8-9-10-11-12-13-14-15-17(18)19-16(2)3/h16H,4-15H2,1-3H3
• Klucz InChI: AXISYYRBXTVTFY-UHFFFAOYSA-N

Opis

Opis ogólny

Isopropyl Myristate (IPM) is a fatty acid ester, which is used as solvent in water-in-oil emulsion, oils and fatty based ointments. Membrane filtration is the Pharmacopoeia method of choice for sterility testing. Viscous products, such as creams and ointments, can be difficult to filter and hence, are normally diluted in a sterile solvent, such as IPM to improve the filterability of these samples.

Zastosowanie

Isopropyl Myristate is used to dilute oils and oily solutions, ointments, and creams to facilitate membrane filtration.

Cechy i korzyści

• Preparing IPM for microbiological testing is a hurdle for any QC laboratory. Sterility is usually achieved with a long and difficult filtration process. Our Sterile IPM is sterilized by Gamma-irradiation and can be used as any ready-to-use rinse fluid or culture media.
• For sterility testing sterile IPM should be used in combination with Our Steritest^® NEO “Green base” device (TZHVSL210).

Informacje prawne

STERITEST is a registered trademark of Merck KGaA, Darmstadt, Germany

This page may contain text that has been machine translated.

Informacja o środkach bezpieczeństwa

• Kod klasy składowania: 10 - Combustible liquids
• Klasa zagrożenia wodnego (WGK): awg
• Temperatura zapłonu (°F): 302.0 °F
• Temperatura zapłonu (°C): > 150 °C