Z568791

Ace pressure tube

bushing type, Front seal, capacity 185 mL, L × O.D. 30.5 cm × 38.1 mm

• Kod UNSPSC: 41121800
• NACRES: NB.11

Właściwości

• Materiały: PTFE cap; borosilicate glass tube; colorless tube; round bottom; screw top cap (plugseal); white cap
• sterylność: non-sterile
• Właściwości: bushing type Front seal; graduations: no; internal thread
• producent / nazwa handlowa: Ace Glass 8648-105
• dł. × śr. zewn.: 30.5 cm × 38.1 mm
• pojemność: 185 mL
• Średnica: 38.1 mm
• dopasowywanie: Ace-Thred for #15
• typ wiązania: non-treated surface

Opis

Opis ogólny

Heavy-wall borosilicate glass tubes are pressure rated to 150 psig. Useful for the polymerization and analysis of halogens by thermal decomposition in the presence of lime. Tubes are supplied complete with Ace-Thred PTFE bushing and FETFE^® O-ring.

For pressure work, the "Front seal" bushing is recommended (allows O-ring to sit at narrow neck of tube, below the threads). "Back seal" bushing can also be used, if preferred (allows O-ring to sit on top of the tube against cap).

Replacement FETFE O-rings:

Front Seal:
Z504661 (Ace-Thred #7)
Z504858 (Ace-Thred #15)
Z505056 (Ace-Thred #25)

Back Seal:
Z504742 (Ace-Thred #7)
Z505021 (Ace-Thred #15)
Z505110 (Ace-Thred #25)

CAUTION: This glassware is not guaranteed against breakage caused by pressure or vacuum. These tubes should never be used if scratched or otherwise damaged.

Informacje prawne

FETFE is a registered trademark of Ace Glass, Inc.

This page may contain text that has been machine translated.