추천 제품
material
PTFE membrane
polypropylene housing
무균
non-sterile
제품 라인
Millex™
특징
holdup volume≤ 15 μL (after air purge)
hydrophilic
제조업체/상표
Millex™
파라미터
10 bar max. inlet pressure (150 psi)
43 mL/min flow rate
43 mL/min water flow rate
45 °C max. temp.
기술
LC/MS: suitable
UHPLC-MS: suitable
UHPLC: suitable
analytical sample preparation: suitable
mass spectrometry (MS): suitable
높이
21 mm
직경
13 mm
여과 면적
0.8 cm2
용적
10 mL
색상
light blue
공극 크기
0.20 μm
입력
sample type aqueous solution(s)
sample type organic solution(s)
버블 포인트(bubble point)
≥3.0 bar at 23 °C
피팅
female Luer-Lok® inlet
male Luer outlet slip
배송 상태
ambient
일반 설명
SLLGX13NL replaces SLLGH13NL
SLLGX13NK replaces SLLGH13NK
Applications:
Sample filtration prior to UHPLC, LC-MS, and mass spectrometry; Filtration of protein-containing solutions, and aqueous or organic solutions
포장
규격
결합
물리적 형태
법적 정보
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
이미 열람한 고객
문서
Millex® hydrophilic PTFE syringe filters boast broad chemical compatibility and are HPLC-certified, guaranteeing low extractables. With their robust performance, these filters can be used for a variety of samples without the risk of membrane failure or sample contamination.
Millex® hydrophilic PTFE syringe filters boast broad chemical compatibility and are HPLC-certified, guaranteeing low extractables. With their robust performance, these filters can be used for a variety of samples without the risk of membrane failure or sample contamination.
Filtration is used in dissolution testing to end the dissolution process and prepare the sample for HPLC analysis. This page discusses the importance of filtration and utility of hydrophilic PTFE Millex® syringe filters in dissolution testing.
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.