CW1901S03

Milligard^® 1.2 µm, Cartridge

pore size 1.2 μm, cartridge nominal length 10 in. (25 cm), Code 0 (2-222; O-rings)

• 동의어(들): Milligard Cartridge Filter 10 in. Code 0 1.2 μm
• UNSPSC 코드: 23151806
• eCl@ss: 32031610

속성

• material: mixed cellulose esters (MCE) ; polyester support; polypropylene ; silicone seal
• Quality Level: 400
• 규정 준수: meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food); meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• 무균: non-sterile
• 멸균 적합성: autoclavable compatible; steam-in-place compatible
• 제품 라인: Milligard^®
• 특징: hydrophilic
• 제조업체/상표: Milligard^®
• 파라미터: 3.5 bar max. differential pressure (50 psid) at 25 °C; 3.5 bar max. inlet pressure (50 psi) at 25 °C
• 기술: prefiltration: suitable
• 길이: 10 in.
• 너비: 2.9 in.
• 카트리지 공칭 길이: 10 in. (25 cm)
• 직경: 7.1 cm (2.8 in.)
• 여과 면적: 0.8 m²
• 불순물: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• 중량 추출물: ≤50 mg/cartridge
• 기질: Milligard^®
• 공극 크기: 1.2 μm nominal pore size; 1.2 μm pore size
• 입력: sample type liquid
• 카트리지 코드: Code 0 (2-222; O-rings)

설명

일반 설명

Device Configuration: Cartridge

특징 및 장점

Format: Single Layer

포장

Double Easy-Open bag

기타 정보

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to the installation and wetting sections of OptiScale^®-25 user guide and introduction section of the Mixed cellulose esters Tech Brief
• Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

규격

Filter Grade: Standard Milligard^® Media

제조 메모

Sterilization Method
10 autoclave cycles or SIP @ 121 °C for 30 min

This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

분석 메모

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥3 L

법적 정보

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

안전성 정보

• 픽토그램: GHS02
• 신호어: Danger
• 유해 및 위험 성명서: H228
• 예방조치 성명서: P210 - P240 - P241 - P280 - P370 + P378
• Hazard Classifications: Flam. Sol. 1
• Storage Class Code: 11 - Combustible Solids
• WGK: WGK 2