おすすめの製品
物質
stainless steel column
品質水準
認証
suitable for USP L1
製品種目
Purospher®
特徴
endcapped
包装
pkg of 1 column
pkg of 1 holder
標識化の程度
17% Carbon loading
パラメーター
250 bar pressure
65 °C max. temp.
テクニック
HPLC: suitable
LC/MS: suitable
mass spectrometry (MS): suitable (High)
カラムL × 内径
5.5 cm × 2 mm
表面積
330 m2/g
マトリックス
fully porous particle
マトリックス活性基
C18 bonding phase
粒径
3 μm
ポアサイズ
120 Å pore size
operating pH range
1.5-10.5
分離法
reversed phase
保管温度
no temp limit
類似した製品をお探しですか? 訪問 製品比較ガイド
詳細
Purospher® STAR RP-18 endcapped, 3 µm HPLC columns are designed for universal use and allow the separation of basic, neutral, and metal chelating compounds with simple mobile phases and excellent peak symmetry. They are based on ultra-pure fully porous silica particles (Type B). These columns offer an outstanding stability from pH 1.5 to 10.5 over a wide temperature range, and suitability for up to 100% aqueous mobile phases. Plus, they demonstrate best all-round retention characteristics, as proven by the Tanaka test. The Purospher® STAR RP-18 endcapped, 3 µm LiChroCART® 55-2 cartridge set contains a Purospher® STAR RP-18 endcapped, 3 µm LiChroCART® 55-2 cartridge column and a manuCART™ 55 mm cartridge column holder part number 1.50226.0001. LiChroCART® cartridge columns mounted with a manuCART™ cartridge column holder is hand-tight only and has therefore a maximum pressure stability of 250 bar. The column dimension of 55 mm length x 2 mm I.D. is the optimal choice for fast HPLC separations at lower flow rate, allowing significant solvent savings and improved sensitivity. A 2 mm I.D. column enables a more sustainable separations in comparison to 4, 4.6 or 3 mm I.D. column due to the use of significant less solvent for the chromatographic separation.Learn more about Purospher® STAR HPLC and UHPLC ColumnsLearn more about the Supelco HPLC Column portfolio and Method development:Brochure: HPLC and UHPLC Column Selection GuideBrochure: A Practical Guide to HPLC - Method Development Guide
アプリケーション
Intended to be used in the separation of aflatoxins, aldehydes, alkaloids, antibiotics, catecholamines, explosives, oligonucleotides, esters, fat soluble vitamins, lipids, fatty acids, flavonoids, ketones, nitrosamines, nucleosides, PAHs, PCBs, peptides, pesticides, phenols, phthalates, preservatives, steroids, metabolized steroids, sulfonamides, sweeteners, and water soluble vitamins.
特徴および利点
- Ultra-pure silica (99.999%) for excellent peak symmetry
- High separation efficiency
- Reproducible results from run-to-run and batch-to-batch
- Best all-round performance according to Tanaka
- Outstanding pH stability from pH 1.5 to 10.5
- No phase collapse when using highly aqueous mobile phases
- Good suitability for LC-MS applications
アナリシスノート
Pressure: ≤ 55 bar
Theoretical Plates (N/m) (1,2-Benzanthracene): ≥ 90000
Symmetry (1,2-Benzanthracene): 0.8 - 1.4
Capacity factor (1,2-Benzanthracene): ≤ 10.0
Extent of testing: passes test
Theoretical Plates (N/m) (1,2-Benzanthracene): ≥ 90000
Symmetry (1,2-Benzanthracene): 0.8 - 1.4
Capacity factor (1,2-Benzanthracene): ≤ 10.0
Extent of testing: passes test
法的情報
LICHROCART is a registered trademark of Merck KGaA, Darmstadt, Germany
MANUCART is a trademark of Merck KGaA, Darmstadt, Germany
Purospher is a registered trademark of Merck KGaA, Darmstadt, Germany
試験成績書(COA)
製品のロット番号・バッチ番号を入力して、試験成績書(COA) を検索できます。ロット番号・バッチ番号は、製品ラベルに「Lot」または「Batch」に続いて記載されています。
ライフサイエンス、有機合成、材料科学、クロマトグラフィー、分析など、あらゆる分野の研究に経験のあるメンバーがおります。.
製品に関するお問い合わせはこちら(テクニカルサービス)