57173
ENVI-Disk™ Holder
for use with 47 mm ENVI-Disk disks
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Codice UNSPSC:
12000000
Prodotti consigliati
tecniche
solid phase extraction (SPE): suitable
applicazioni
food and beverages
Compatibilità
for use with 47 mm ENVI-Disk disks
Descrizione generale
Use the ENVI-Disk Holder with 47 mm ENVI-DSK SPE disks.
The unique design of the holder allows each disk to be installed and held firmly in place without wrinkling and tearing. A screw clamp provides uniform pressure on the disk and the sealing surfaces to prevent troublesome leaks - spring-loaded clamps cannot offer the sealing integrity of the ENVI-Disk Holder.
The unit consists of a 1 L sample funnel, a threaded screw clamp, a PTFE disk support, and a PTFE filter base/adapter with a vacuum attachment fitting. The filter base fits onto any 1 L flask that has a 40/35 tapered ground glass neck. Use 25 x 250 mm test tubes to collect disk eluates.
To use the holder, place the base/adapter on the 1 L flask and center an ENVI-DSK on the disk support in the base. Loosen the screw clamp to install the funnel, then tighten to secure the unit. Attach the base/adapter to a vacuum source, and the unit is ready to use.
The unique design of the holder allows each disk to be installed and held firmly in place without wrinkling and tearing. A screw clamp provides uniform pressure on the disk and the sealing surfaces to prevent troublesome leaks - spring-loaded clamps cannot offer the sealing integrity of the ENVI-Disk Holder.
The unit consists of a 1 L sample funnel, a threaded screw clamp, a PTFE disk support, and a PTFE filter base/adapter with a vacuum attachment fitting. The filter base fits onto any 1 L flask that has a 40/35 tapered ground glass neck. Use 25 x 250 mm test tubes to collect disk eluates.
To use the holder, place the base/adapter on the 1 L flask and center an ENVI-DSK on the disk support in the base. Loosen the screw clamp to install the funnel, then tighten to secure the unit. Attach the base/adapter to a vacuum source, and the unit is ready to use.
Note legali
ENVI-Disk is a trademark of Sigma-Aldrich Co. LLC
Scegli una delle versioni più recenti:
Certificati d'analisi (COA)
Lot/Batch Number
Ci dispiace, ma al momento non ci sono COA disponibili online per questo prodotto.
Se ti serve aiuto, non esitare a contattarci Servizio Clienti
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.