343210

FITC Labeling Kit

• Sinonimo/i: FITC Antibody Labeling Kit, FITC Conjugation Kit, Fluorescent Labeling Kit
• Codice UNSPSC: 41116133
• NACRES: NA.41

Proprietà

• Produttore/marchio commerciale: Calbiochem^®
• Livello qualitativo: 100
• Condizioni di stoccaggio: OK to freeze; protect from light
• Temperatura di conservazione: 2-8°C

Descrizione

Descrizione generale

Provides means to quickly and simply label antibodies or other proteins with fluorescein. Direct labeling of the primary antibody eliminates the need for a secondary antibody, and results in a lower background and overall higher signal-to-noise ratio. Each kit is sufficient to perform at least five conjugations on proteins of 100 µg to 2.5 mg each.

Componenti

Fluorescein (five vials), Carbonate Buffer Concentrate, DMF Solvent, PBS Buffer Concentrate, and a user protocol.

Attenzione

Toxicity: Multiple Toxicity Values, refer to MSDS (O)

Principio

The Calbiochem FITC Labeling Kit provides a means of quickly and simply labeling antibodies or other proteins with fluorescein. FITC-antibody conjugates are useful in many applications, such as flow cytometry and immunocytochemistry. Other proteins such as steroids may also be labeled with FITC. Direct labeling of the primary antibody eliminates the need for a secondary antibody, and therefore results in a lower background and an overall higher signal to noise ratio.

Nota sulla preparazione

Antibody/Protein Preparation: Add 10 ml of carbonate buffer concentrate to 990 ml of distilled water and dialyze antibody in buffer overnight.

Risultati analitici

1. Read the absorbance of the FITC-antibody conjugate at two wavelengths: 280 nm and 495 nm. Use the 1X PBS/0.1%NaN3 as the spectrophotometric blank. Optimal absorbance readings of the conjugated protein will be within the range of 0.2-1.2 ABS.

2. Using the two absorbance readings, calculate the F/P molar ratio of the FITC/Protein conjugate using the following equation:<div class="Bio_doc_image">Figure 1: F/P Molar Ration
</div>

3. There are 2 equations used for the determination of the concentration of the FITC-antibody conjugate. If the protein used for conjugation was IgG, use the following equation to estimate the concentration of the labeled antibody:<div class="Bio_doc_image"><p class="title">Figure 2: Concentration of FITC-IgG
</div>If the protein conjugated was not IgG, use the following equation to estimate the concentration of conjugated protein:<div class="Bio_doc_image">Figure 3: Concentration of FITC-Protein
</div>Where E^0.1% is the A₂₈₀ reading of a 1 mg/ml solution of the unconjugated protein, as measured in a cuvette of 1 cm path length.

Altre note

Due to the nature of the Hazardous Materials in this shipment, additional shipping charges may be applied to your order. Certain sizes may be exempt from the additional hazardous materials shipping charges. Please contact your local sales office for more information regarding these charges.

Note legali

CALBIOCHEM is a registered trademark of Merck KGaA, Darmstadt, Germany

Informazioni sulla sicurezza

• Pittogrammi: GHS08
• Avvertenze: Danger
• Indicazioni di pericolo: H317,H319,H334,H360D
• Consigli di prudenza: P202 - P261 - P280 - P302 + P352 - P305 + P351 + P338 - P308 + P313
• Classi di pericolo: Eye Irrit. 2 - Repr. 1B - Resp. Sens. 1 - Skin Sens. 1
• Codice della classe di stoccaggio: 6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects