1.52002

Chromolith^® RP-18 endcapped

L × I.D. 50 mm x 3 mm HPLC column

• Sinonimo/i: Chromolith^® FastGradient RP-18 endcapped 50-3 HPLC column
• Codice UNSPSC: 41115709

Proprietà

• Materiali: PEEK column
• Livello qualitativo: 100
• agenzia: suitable for USP L1
• Nome Commerciale: Chromolith^®
• Caratteristiche: endcapped
• Confezionamento: 1 ea of
• Grado di funzionalizzazione: 18% Carbon loading
• Parametri: 200 bar pressure; 45 °C max. temp.
• tecniche: HPLC: suitable; LC/MS: suitable; mass spectrometry (MS): suitable (High)
• Lungh. × diam. int. colonna: 5 cm × 3 mm
• Matrice: monolithic silica
• Gruppo funzionale matrice: C18 bonding phase
• Dimensione pori: 13 nm mesoporosity; 2 μm macroporosity
• operating pH range: 2-7.5
• Tecnica di separazione: reversed phase
• Temperatura di conservazione: no temp limit

Descrizione

Descrizione generale

Chromolith^® columns are made of monolithic silica with a characteristic bimodal pore structure.

Chromolith^® FastGradient RP-18 endcapped 50-3 columns have macropores with 2 μm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith^® FastGradient RP-18 endcapped 50-3 columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 μm particle size fully porous particulate column. Chromolith^® FastGradient RP-18 endcapped 50-3 columns are perfectly suitable for LC-MS applications.
The column dimension of 50 mm length and 3 mm I.D. is the best choice for fast separations on any HPLC and UHPLC System.

The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:

• Rapid separations at very low column back-pressure
• High matrix tolerance, allowing time and cost savings with simplified workflows
• Cost-savings due to extended column lifetimes
• Connection of columns, flow gradients and the use of mobile phases with higher viscosity

The recommended Guard-columns are:
Chromolith^® RP-18 endcapped 5-3 guard cartridges (3 pieces) [1.52005] with the Chromolith^® Guard Cartridge Holder 5 mm x 3 mm [1.52004].
Holder and guard cartridges are also available as Guard cartridge set [1.52008].

The Chromolith^® column coupler can be used to significantly increase the separation efficiency of Chromolith^® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467].

Learn more:
Brochure: Race through your Separations on Any System. Chromolith^® Monolithic Silica HPLC Columns

All Supelco HPLC Columns, including monolithic Chromolith^® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument

Risultati analitici

Appearance: passes test
Pressure: ≤ 15 bar
Performance (anthracene)
Theoretical Plates (N/m) (Anthracene): ≥ 80000
Capacity factor (Anthracene): 3.6 - 4.6
Tailing (USP): 0.90 - 1.30 %
Selectivity
separation factor (anthracene/progesterone): 2.30 - 2.60

Note legali

Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany

Kromasil is a registered trademark of EKA Chemicals AB