1.17363
MAS-100 Atmos® Sampling Head
for use with MAS-100 Atmos®, no. of holes, 300 autoclavable, hole diam. 0.47 mm
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Codice UNSPSC:
41103403
NACRES:
NA.74
Prodotti consigliati
Materiali
anodized aluminum head
agenzia
ISO 8573-7:2003
Caratteristiche
no. of holes 300 autoclavable
Produttore/marchio commerciale
MAS-100 Atmos®
Diam. fori
0.47 mm
applicazioni
compressed gas monitoring
cosmetics
food and beverages
pharmaceutical
Compatibilità
for use with MAS-100 Atmos®
Descrizione generale
The MAS-100 Atmos® Sampling Head is designed as an accessory for MAS-100 Atmos® Compressed Gas Sampler made from anodized aluminum. It is supplied with a perforated lid for uniform impaction and convenient agar plate usage.
Each perforated lid is provided with a black marking for individual identification and traceability. The type of the head is indicated by a 3-letter code followed by a 6-digit serial number. For the 300 x 0.47 mm perforated lid for MAS-100 Atmos® the type of code is ALA. The same information is included in the 2D bar code.
Furthermore, for easy visual identification the sieve plate is colored in green. Additional marking indicates the correct positioning for opening and closing the lid.
The default flow rate is 100 liter/min (LPM) with an impaction speed of 20 m/s attains a nominal d50 value of 1.1 μm.
An optional perforated lid with 300x0.6mm diameter is available to achieve a d50 of 1.1 μm as well at a pre-selected flow rate of 100 LPM (refer related product below)
Each perforated lid is provided with a black marking for individual identification and traceability. The type of the head is indicated by a 3-letter code followed by a 6-digit serial number. For the 300 x 0.47 mm perforated lid for MAS-100 Atmos® the type of code is ALA. The same information is included in the 2D bar code.
Furthermore, for easy visual identification the sieve plate is colored in green. Additional marking indicates the correct positioning for opening and closing the lid.
The default flow rate is 100 liter/min (LPM) with an impaction speed of 20 m/s attains a nominal d50 value of 1.1 μm.
An optional perforated lid with 300x0.6mm diameter is available to achieve a d50 of 1.1 μm as well at a pre-selected flow rate of 100 LPM (refer related product below)
Applicazioni
The MAS-100 Atmos® Sampling head supplied with 300 x 0.47 mm holes perforated lid is used for compressed gas sampling.
Caratteristiche e vantaggi
- traceability by individual black marking incl. 2D bar code
- accuracy of holes allow exchange on the instrument without need for additional calibration.
- compatible with a wide range of disinfectants and autoclavable.
Note legali
MAS-100 Atmos is a registered trademark of MBV AG
Prodotti correlati
N° Catalogo
Descrizione
Determinazione del prezzo
Certificati d'analisi (COA)
Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.