1.17354
MAS-100 Atmos® Pressure Tube
tube L 2 m, for use with MAS-100 Atmos®
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Codice UNSPSC:
41103403
NACRES:
NA.74
Prodotti consigliati
Materiali
PTFE tube
Conformità normativa
FDA
Descrizione
Compressed gas sampling
Caratteristiche
autoclavable
Produttore/marchio commerciale
MAS-100 Atmos®
Lunghezza
2 m
applicazioni
compressed gas monitoring
cosmetics
food and beverages
pharmaceutical
Compatibilità
for use with MAS-100 Atmos®
Descrizione generale
MAS-100 Atmos® Pressure tube is a PTFE tubing for compressed gas sampling connected via the pressure tube set.
The PTFE tube is 2m long and supplied with one 34mm tri-clamp adapter and silicone gasket on one end, fitting to the sampling head. The other end is connected using a universal 3/8′′ threaded female connector to enable gas supply.
One set of MAS-100 Atmos® Pressure Tube is included in the scope of delivery. The same set can be ordered as a separate accessory, if needed for back up e.g. while autoclaving.
The PTFE tube is 2m long and supplied with one 34mm tri-clamp adapter and silicone gasket on one end, fitting to the sampling head. The other end is connected using a universal 3/8′′ threaded female connector to enable gas supply.
One set of MAS-100 Atmos® Pressure Tube is included in the scope of delivery. The same set can be ordered as a separate accessory, if needed for back up e.g. while autoclaving.
Applicazioni
MAS-100 Atmos® Pressure tube is used for compressed gas sampling. The pressure tube kit is suitable to supply test gases from source to the test environment.
Componenti
1 x PTFE tube (2m)
1 x Tri clamp (34mm diameter)
1 x Silicone gasket (34/10mm)
1 x 3/8′′ BSP female connector
1 x Tri clamp (34mm diameter)
1 x Silicone gasket (34/10mm)
1 x 3/8′′ BSP female connector
Altre note
Steps to connect the MAS-100 Atmos® Pressure tube
- Connect the end of the pressure connection tubing with the universal 3/8-inch connector (female) to the closed gas supply at the sampling location. The gas supply must be equipped with a male 3/8-inch connector to fit to the pressure connection tubing of MAS-100 Atmos®. Ensure the connection is secured and there is no possibility of a leak
- Place the silicone gasket on top of the closed sampling head and fix the pressure connection tubing with the 34mm tri-clamp to the sampling head.
Note legali
MAS-100 Atmos is a registered trademark of MBV AG
Certificati d'analisi (COA)
Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.