Passa al contenuto
Merck
Tutte le immagini(2)

Key Documents

739332

Sigma-Aldrich

PEDOT:PSS

greener alternative

high-conductivity grade, 1.1% aqueous dispersion, surfactant-free

Sinonimo/i:

Orgacon ICP 1050, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali


About This Item

Numero MDL:
Codice UNSPSC:
12352103
NACRES:
NA.23

product name

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), 1.1% in H2O, surfactant-free, high-conductivity grade

Grado

high-conductivity grade

Livello qualitativo

Forma fisica

liquid

Caratteristiche più verdi

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

Concentrazione

1.1% in H2O

Resistenza

<100 Ω/sq, <80% visible light transmission (40μm wet)

Indice di rifrazione

n20/D 1.334

pH

<2.5

Viscosità

30-100 cP(20 °C)

Densità

0.999 g/mL at 25 °C

Categoria alternativa più verde

Temperatura di conservazione

2-8°C

Cerchi prodotti simili? Visita Guida al confronto tra prodotti

Descrizione generale

Aqueous surfactant-free dispersion of high conductivity grade PEDOT:PSS polymer. Optimal performance in transparent conductive coatings may require addition of formulation ingredients (e.g. surfactants and high-boiling solvents).Conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer without a high boiling solvent (HBS), that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. It has the following properties that make it a viable polymer in organic electronics.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.

Applicazioni

PEDOT:PSS can be used as an electrode material with high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic photovoltaics (OPV), perovskite solar cells (DSSCs), organic light emitting diodes (OLEDs) and other biomedical sensors.
Used to prepare highly transparent conductive coating formulations. Primary and secondary nucleation by introducing PEDOT:PSS in a hydrogel was studied.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.

Note legali

Product of Agfa-Gevaert N.V.
Orgacon is a trademark of Agfa-Gevaert N.V.

Pittogrammi

Corrosion

Avvertenze

Danger

Indicazioni di pericolo

Classi di pericolo

Eye Dam. 1 - Skin Corr. 1B

Codice della classe di stoccaggio

8B - Non-combustible corrosive hazardous materials

Classe di pericolosità dell'acqua (WGK)

WGK 3

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable


Scegli una delle versioni più recenti:

Certificati d'analisi (COA)

Lot/Batch Number

Non trovi la versione di tuo interesse?

Se hai bisogno di una versione specifica, puoi cercare il certificato tramite il numero di lotto.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

High-resolution electrohydrodynamic jet printing of small-molecule organic light-emitting diodes
Kim K, et al.
Nanoscale, 7(32), 13410-13415 (2015)
Explaining the effects of processing on the electrical properties of PEDOT: PSS
Van Reenen S, et al.
Organic Electronics, 15(12), 3710-3714 (2014)
Harkema, S. et al.
Proc. SPIE: Int. Soc. Opt. Eng., 7415, 74150T-741501 (2009)
Mechanically tunable conductive interpenetrating network hydrogels that mimic the elastic moduli of biological tissue
Feig VR, et al.
Nature Communications, 9(1), 2740-2740 (2018)
Hybrid photovoltaic devices from regioregular polythiophene and ZnO nanoparticles composites
Das NC and Sokol PE
Renewable Energy, 35(12), 2683-2688 (2010)

Articoli

New conducting and semiconducting polymers for plastic electronics

Conducting polymers such as polyaniline, polythiophene and polyfluorenes are now much in the spotlight for their applications in organic electronics and optoelectronics.

Find advantages of inorganic interface layer inks for organic electronic & other applications.

Progress in Organic Thermoelectric Materials & Devices including high ZT values of >0.2 at room temperature by p-type (PEDOT:PSS) & n-type (Poly[Kx(Ni-ett)]) materials are discussed.

Vedi tutto

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.