推荐产品
化驗
≥97%
形狀
liquid
折射率
n20/D 1.431 (lit.)
bp
190 °C (lit.)
密度
1.045 g/mL at 25 °C (lit.)
儲存溫度
2-8°C
SMILES 字串
CO[Si](CCCOC(=O)C(C)=C)(OC)OC
InChI
1S/C10H20O5Si/c1-9(2)10(11)15-7-6-8-16(12-3,13-4)14-5/h1,6-8H2,2-5H3
InChI 密鑰
XDLMVUHYZWKMMD-UHFFFAOYSA-N
正在寻找类似产品? 访问 产品对比指南
一般說明
3-(三甲氧基硅烷)丙基丙烯酸酯(TMSPMA)是一种疏水性单体。丙烯酸酯的其他官能团促进了TMSPMA在塑料表面上的接枝聚合。3-(三甲氧基硅烷)丙基丙烯酸酯经过一级动力学聚合,形成聚TMSPMA,这是一种对水稳定的聚合物。
應用
3-(三甲氧基硅烷)丙基丙烯酸酯已可用于以下应用:
- 等电点聚焦电泳可产生pH梯度,导致灌注凝胶发生膨胀或收缩。通过使用3-(三甲氧基硅烷)丙基丙烯酸酯将聚丙烯酰胺凝胶共价连接到玻璃板上,能够防止发生上述情况。
- 使用3-(三甲氧基硅烷)丙基丙烯酸酯和聚-L-赖氨酸进行原位 杂交,能够将细胞、显微切片和整体器官更快、更持久地粘附在载玻片或其他玻璃表面上。
- 3-(三甲氧基硅烷)丙基丙烯酸酯还被用于制备有机/无机杂化纳米材料。
包裝
附带的产品信息表介绍了本品的使用方法。
相關產品
产品编号
说明
价格
儲存類別代碼
10 - Combustible liquids
水污染物質分類(WGK)
WGK 1
閃點(°F)
197.6 °F - closed cup
閃點(°C)
92 °C - closed cup
個人防護裝備
Eyeshields, Gloves, type ABEK (EN14387) respirator filter
其他客户在看
Sean Brahim et al.
Biomacromolecules, 4(5), 1224-1231 (2003-09-10)
An amphiphilic hydrogel of poly(2-hydroxyethyl methacrylate) cross-linked with tetraethyleneglycol diacrylate (TEGDA) was synthesized to contain the hydrophobic monomer 3-(trimethoxy-silyl) propyl methacrylate (PMA) and the pH-responsive, hydrophilic monomer N',N'-dimethylaminoethyl methacrylate (DMAEMA). The gels were separately loaded with two biomolecular probes, insulin
ATRP of 3-(triethoxysilyl)propyl methacrylate and preparation of ?stable? gelable block copolymers
Ming Xiong
European Polymer Journal, 44, 3835-3841 (2008)
M Aguadé et al.
Proceedings of the National Academy of Sciences of the United States of America, 91(11), 4658-4662 (1994-05-24)
Single-strand conformation polymorphism (SSCP) analysis followed by DNA sequencing of stratified sub-samples was used to survey DNA polymorphism in the su(s) and su(wa) regions in a natural population of Drosophila melanogaster. su(s) and su(wa) are located near the telomere of
Bozhen Zhang et al.
Journal of materials chemistry. B, 9(35), 7196-7204 (2021-07-23)
Label-free cell sorting devices are of great significance for biomedical research and clinical therapeutics. However, current platforms for label-free cell sorting cannot achieve continuity and selectivity simultaneously, resulting in complex steps and limited reliability. Here, an immunoaffinity-based cell catch-transport-release thermo-chemo-mechanical
Ke Liu et al.
Journal of colloid and interface science, 365(1), 289-295 (2011-10-04)
Thermoplastics have been increasingly used for fabricating microfluidic devices because of their low cost, mechanical/biocompatible attributes, and well-established manufacturing processes. However, there is sometimes a need to integrate such a device with components made from other materials such as polydimethylsiloxane
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门