推荐产品
蒸汽密度
5 (vs air)
品質等級
蒸汽壓力
1 mmHg ( 159.5 °C)
產品線
BioXtra
化驗
≥99.5% (HPLC)
自燃溫度
788 °F
燃燒殘留物
≤0.05% (as SO4)
損耗
≤1% loss on drying, 110 °C
bp
265 °C/100 mmHg (lit.)
mp
151-154 °C (lit.)
151-154 °C
溶解度
H2O: soluble 23 g/L at 25 °C
負離子痕跡
chloride (Cl-): ≤50 mg/kg
nitrate (NO3-): ≤30 mg/kg
sulfate (SO42-): ≤500 mg/kg
正離子痕跡
As: ≤3 mg/kg
Cu: ≤10 mg/kg
Fe: ≤5 mg/kg
Pb: ≤10 mg/kg
Zn: ≤10 mg/kg
SMILES 字串
OC(=O)CCCCC(O)=O
OC(=O)CCCCC(O)=O
InChI
1S/C6H10O4/c7-5(8)3-1-2-4-6(9)10/h1-4H2,(H,7,8)(H,9,10)
InChI 密鑰
WNLRTRBMVRJNCN-UHFFFAOYSA-N
正在寻找类似产品? 访问 产品对比指南
相关类别
訊號詞
Danger
危險聲明
危險分類
Eye Dam. 1
儲存類別代碼
11 - Combustible Solids
水污染物質分類（WGK）
WGK 1
閃點（°F）
384.8 °F - closed cup
閃點（°C）
196 °C - closed cup
個人防護裝備
dust mask type N95 (US), Eyeshields, Gloves
其他客户在看
J B J H van Duuren et al.
Biotechnology and bioengineering, 108(6), 1298-1306 (2011-02-18)
A limited life cycle assessment (LCA) was performed on a combined biological and chemical process for the production of adipic acid, which was compared to the traditional petrochemical process. The LCA comprises the biological conversion of the aromatic feedstocks benzoic
Holger Noack et al.
Inorganic chemistry, 50(4), 1194-1202 (2011-01-28)
Adipic acid is a key compound in the chemical industry, where it is mainly used in the production of polymers. The conventional process of its generation requires vast amounts of energy and, moreover, produces environmentally deleterious substances. Thus, there is
H V Pawar et al.
Colloids and surfaces. B, Biointerfaces, 102, 102-110 (2012-09-26)
Streptomycin (STP) and diclofenac (DLF) loaded film dressings were prepared by blending Polyox(®) (POL) with four hydrophilic polymers [hydroxypropylmethylcellulose (HPMC), carrageenan (CAR), sodium alginate (SA) or chitosan (CS)] using glycerol (GLY) as plasticiser. The films were characterised by scanning electron
M A Shirai et al.
Carbohydrate polymers, 92(1), 19-22 (2012-12-12)
Biodegradable films were produced from blends contained a high amount of thermoplastic starch (TPS) and poly(lactic acid) (PLA) plasticized with different adipate or citrate esters. It was not possible to obtain pellets for the production of films using only glycerol
Krzysztof J Paluch et al.
Journal of pharmaceutical sciences, 100(8), 3268-3283 (2011-04-08)
The production of salt or cocrystalline forms is a common approach to alter the physicochemical properties of pharmaceutical compounds. The goal of this work was to evaluate the impact of anion choice (succinate, adipate, and sulfate) on the physicochemical characteristics
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门