Saltar al contenido
Merck

695890

Sigma-Aldrich

Phosphoric acid 2-hydroxyethyl methacrylate ester

contains 700-1000 ppm monomethyl ether hydroquinone, 90%

Sinónimos:

2-Hydroxyethyl methacrylate phosphate

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
C6H10O3 · xH3PO4
Número de CAS:
Número MDL:
Código UNSPSC:
12162002
NACRES:
NA.23

descripción

~25% diester content

Nivel de calidad

Ensayo

90%

Formulario

liquid

contiene

700-1000 ppm monomethyl ether hydroquinone

índice de refracción

n20/D 1.4688

densidad

1.37 g/mL at 25 °C

temp. de almacenamiento

2-8°C

cadena SMILES

[P](=O)(O)(O)O.O(CCO)C(=O)C(=C)C

InChI

1S/C6H10O3.H3O4P/c1-5(2)6(8)9-4-3-7;1-5(2,3)4/h7H,1,3-4H2,2H3;(H3,1,2,3,4)

Clave InChI

POLZHVHESHDZRD-UHFFFAOYSA-N

Descripción general

Phosphoric acid 2-hydroxyethyl methacrylate ester is a phosphoric acid based ester which is composed of phosphoric acid monomer and diethyl methacrylate. It can be used as a chelating absorbent due to its high affinity towards metal ions.

Aplicación

Phosphoric acid 2-hydroxyethyl methacrylate ester is used in surface functionalization of polytetrafluoroethylene (PTFE) for craniofacial applications.

Pictogramas

CorrosionExclamation mark

Palabra de señalización

Danger

Frases de peligro

Clasificaciones de peligro

Acute Tox. 4 Oral - Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1B - STOT SE 3

Órganos de actuación

Respiratory system

Código de clase de almacenamiento

8A - Combustible corrosive hazardous materials

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

293.0 °F - open cup

Punto de inflamabilidad (°C)

145 °C - open cup

Equipo de protección personal

Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Influence of self-etching primer treatment on the adhesion of resin composite to polished dentin and enamel
Hayakawa T, et al.
Dental Materials : Official Publication of the Academy of Dental Materials, 14(2), 99-105 (1998)
Rapid removal of arsenic (V) by zirconium (IV) loaded phosphoric chelate adsorbent synthesized by radiation induced graft polymerization
Seko N, et al.
Reactive and Functional Polymers, 59(3), 235-241 (2004)
K de Groot et al.
Journal of dental research, 59(9), 1493-1496 (1980-09-01)
The mechanical properties of two commercially available dental cements, a zinc phosphate cement and a carboxylate cement, were substantially improved by adding a polymeric phosphate acid to the cement liquids. The improvements can be explained in terms of the change
Ryoko Iwata et al.
Colloids and surfaces. B, Biointerfaces, 62(2), 288-298 (2007-12-07)
Well-defined polymer brushes and block copolymer brushes consisting of 2-methacryloyloxyethyl phosphorylcholine (MPC) and glycidyl methacrylate (GMA) were prepared by surface-initiated atom transfer radical polymerization (ATRP). The polymer brushes were used for the immobilization of antibody fragments in a defined orientation.
Shuko Suzuki et al.
Biomaterials, 26(26), 5303-5312 (2005-04-09)
The bioactivity of three methacryloyloxyethyl phosphate (MOEP) grafted expanded polytetrafluoroethylene (ePTFE) membranes with varying surface coverage as well as unmodified ePTFE was investigated through a series of in vitro tests: calcium phosphate (CaP) growth in simulated body fluid (SBF), serum

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico