Passa al contenuto
Merck
  • Ultra high performance supercritical fluid chromatography coupled with tandem mass spectrometry for screening of doping agents. II: Analysis of biological samples.

Ultra high performance supercritical fluid chromatography coupled with tandem mass spectrometry for screening of doping agents. II: Analysis of biological samples.

Analytica chimica acta (2014-12-04)
Lucie Nováková, Marco Rentsch, Alexandre Grand-Guillaume Perrenoud, Raul Nicoli, Martial Saugy, Jean-Luc Veuthey, Davy Guillarme
ABSTRACT

The potential and applicability of UHPSFC-MS/MS for anti-doping screening in urine samples were tested for the first time. For this purpose, a group of 110 doping agents with diverse physicochemical properties was analyzed using two separation techniques, namely UHPLC-MS/MS and UHPSFC-MS/MS in both ESI+ and ESI- modes. The two approaches were compared in terms of selectivity, sensitivity, linearity and matrix effects. As expected, very diverse retentions and selectivities were obtained in UHPLC and UHPSFC, proving a good complementarity of these analytical strategies. In both conditions, acceptable peak shapes and MS detection capabilities were obtained within 7 min analysis time, enabling the application of these two methods for screening purposes. Method sensitivity was found comparable for 46% of tested compounds, while higher sensitivity was observed for 21% of tested compounds in UHPLC-MS/MS and for 32% in UHPSFC-MS/MS. The latter demonstrated a lower susceptibility to matrix effects, which were mostly observed as signal suppression. In the case of UHPLC-MS/MS, more serious matrix effects were observed, leading typically to signal enhancement and the matrix effect was also concentration dependent, i.e., more significant matrix effects occurred at the lowest concentrations.

MATERIALI
N° Catalogo
Marchio
Descrizione del prodotto

Sigma-Aldrich
Tetraidrofurano, inhibitor-free, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Tetraidrofurano, contains 200-400 ppm BHT as inhibitor, ACS reagent, ≥99.0%
Sigma-Aldrich
Formato di ammonio, reagent grade, 97%
Sigma-Aldrich
Formato di ammonio, ≥99.995% trace metals basis
Sigma-Aldrich
Tetraidrofurano, ≥99.0%, contains 200-400 ppm BHT as inhibitor, ReagentPlus®
Sigma-Aldrich
Tetraidrofurano, contains 250 ppm BHT as inhibitor, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99.9%
Sigma-Aldrich
Ammonium formate solution, BioUltra, 10 M in H2O
Sigma-Aldrich
Furosemide
Sigma-Aldrich
Tetraidrofurano, ACS reagent, ≥99.0%, contains 200-400 ppm BHT as inhibitor
Sigma-Aldrich
Tetraidrofurano, anhydrous, ≥99.9%, inhibitor-free
Sigma-Aldrich
Tetraidrofurano, anhydrous, contains 250 ppm BHT as inhibitor, ≥99.9%
Sigma-Aldrich
Acetazolamide, ≥99%, powder
Sigma-Aldrich
Argon, ≥99.998%
Supelco
Formato di ammonio, eluent additive for LC-MS, LiChropur, ≥99.0%
Supelco
Tetraidrofurano, HPLC grade, ≥99.9%, inhibitor-free
Sigma-Aldrich
Bumetanide, ≥98%
Sigma-Aldrich
Ethacrynic acid, ≥97% (HPLC)
USP
Furosemide, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Formato di ammonio, BioUltra, ≥99.0% (calc. based on dry substance, NT)
USP
Acetazolamide, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Metolazone, ≥98% (HPLC), solid
Supelco
Furosemide, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Tetraidrofurano, for ion-selective electrodes, Selectophore, ≥99.5%
USP
Indapamide, United States Pharmacopeia (USP) Reference Standard
Supelco
Tetraidrofurano, analytical standard
Supelco
Tetraidrofurano, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Argon-40Ar, 99.95 atom %
Supelco
Bendroflumethiazide, analytical standard
Furosemide, European Pharmacopoeia (EP) Reference Standard
Supelco
Indapamide, analytical standard, for drug analysis