07679
Abberior® STAR 635P, NHS ester
suitable for fluorescence
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Codice UNSPSC:
12352108
NACRES:
NA.32
Prodotti consigliati
PM
Mw 1030 g/mol
Livello qualitativo
Solubilità
DMF: 0.25 mg/mL, clear
Fluorescenza
λex 634 nm; λem 654 nm±10 nm in PBS, pH 7.4
Compatibilità
suitable for fluorescence
Temperatura di conservazione
−20°C
Descrizione generale
Abberior STAR635P is the first member of an entirely new class of dyes introduced exclusively by Abberior - first commercially available phosphorylated fluorescent dye. The dye excels in its photophysical parameters, e.g. very bright, very stable and it enables basically background free imaging.
Abberior STAR 635P can substitute Atto™ 647N, AlexaFluor 647, or Cy5. It can be excited with diode lasers (635 nm, 650 nm) or with the 647 nm line of a Krypton laser. For STED, a depletion wavelength of 750 - 780 nm is recommended. Please see reference1 for detailled characteristics.
Best results are obtained with freshly prepared samples.
Abberior STAR 635P particularly well suits the Leica TCS STED system and delivers high-resolution STED images with unmatched quality, e.g. extremely low/no background. The dye serves as an ideal partner for several 2-color STED.
Key Features
Absorption Maximum, λmax: 638 nm (PBS, pH 7.4)
Extinction Coefficient, ε(λmax): 120′000 M-1cm-1 (PBS, pH 7.4)
Correction Factor, CF260 = ε260/εmax: 0.21 (PBS, pH 7.4)
Correction Factor, CF280 = ε280/εmax: 0.40 (PBS, pH 7.4)
Fluorescence Maximum, λfl: 651 nm (PBS, pH 7.4)
Recommended STED Wavelength, λSTED: 750 - 780 nm
Fluorescence Quantum Yield, η: 0.90 (PBS, pH 7.4)
Fluorescence Lifetime, τ: 3.3 ns (PBS, pH 7.4)
Abberior STAR 635P can substitute Atto™ 647N, AlexaFluor 647, or Cy5. It can be excited with diode lasers (635 nm, 650 nm) or with the 647 nm line of a Krypton laser. For STED, a depletion wavelength of 750 - 780 nm is recommended. Please see reference1 for detailled characteristics.
Best results are obtained with freshly prepared samples.
Abberior STAR 635P particularly well suits the Leica TCS STED system and delivers high-resolution STED images with unmatched quality, e.g. extremely low/no background. The dye serves as an ideal partner for several 2-color STED.
Key Features
- First phosphorylated dye
- Unmatched, background free STED imaging contrast
- Verified in the Leica STED system
Absorption Maximum, λmax: 638 nm (PBS, pH 7.4)
Extinction Coefficient, ε(λmax): 120′000 M-1cm-1 (PBS, pH 7.4)
Correction Factor, CF260 = ε260/εmax: 0.21 (PBS, pH 7.4)
Correction Factor, CF280 = ε280/εmax: 0.40 (PBS, pH 7.4)
Fluorescence Maximum, λfl: 651 nm (PBS, pH 7.4)
Recommended STED Wavelength, λSTED: 750 - 780 nm
Fluorescence Quantum Yield, η: 0.90 (PBS, pH 7.4)
Fluorescence Lifetime, τ: 3.3 ns (PBS, pH 7.4)
Compatibilità
Designed and tested for fluorescent super-resolution microscopy
Altre note
Note legali
Atto is a trademark of Atto-Tec GmbH
abberior is a registered trademark of Abberior GmbH
Prodotti correlati
N° Catalogo
Descrizione
Determinazione del prezzo
Codice della classe di stoccaggio
11 - Combustible Solids
Classe di pericolosità dell'acqua (WGK)
WGK 3
Punto d’infiammabilità (°F)
Not applicable
Punto d’infiammabilità (°C)
Not applicable
Scegli una delle versioni più recenti:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
Sören Brandenburg et al.
Frontiers in physiology, 9, 1227-1227 (2018-10-24)
Rationale: Recently, abundant axial tubule (AT) membrane structures were identified deep inside atrial myocytes (AMs). Upon excitation, ATs rapidly activate intracellular Ca2+ release and sarcomeric contraction through extensive AT junctions, a cell-specific atrial mechanism. While AT junctions with the sarcoplasmic
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.