COND25

Conductivity Standard - 25 μmhos/cm

certified reference material

• Sinonimo/i: 25 μmhos/cm Conductivity Calibration Standard
• Codice UNSPSC: 41116107
• NACRES: NA.24

Proprietà

• Grado: certified reference material
• Livello qualitativo: 100; 300
• CdA: current certificate can be downloaded
• Produttore/marchio commerciale: RTC COND-25-0.500
• Concentrazione: in H₂O
• applicazioni: environmental
• Formato: single component solution
• Temperatura di conservazione: 2-30°C

Descrizione

Descrizione generale

This ready-to-use certified reference material (CRM) is produced and qualified following ISO 17034 and ISO/IEC 17025. It is manufactured gravimetrically with traceability to SI and higher order standards from National Institute of Standards and Technology (NIST). Its certified value is based on purity determination by mass balance and gravimetrically prepared value. It is delivered in a 500 mL HDPE bottle.

All information regarding metrological traceability, uncertainty, homogeneity and stability is documented in the certificate of analysis (CoA).

Applicazioni

Suitable for use in calibration of instruments for conductivity measurements.

Altre note

Values of analytes vary lot to lot. Some lots may not contain all analytes.

Informazioni sulla sicurezza

• Codice della classe di stoccaggio: 10 - Combustible liquids
• Classe di pericolosità dell'acqua (WGK): nwg
• Punto d’infiammabilità (°F): Not applicable
• Punto d’infiammabilità (°C): Not applicable