SK2P446E0

Prostak^™ MF Module

pore size 0.65 μm

• Sinonimo/i: Prostak^™ MF Module 0.65μm 20 stack 1.7 m²
• Codice UNSPSC: 23151806
• eCl@ss: 32031623

Proprietà

• Materiali: PVDF ; silicone gasket
• Livello qualitativo: 400
• Caratteristiche: hydrophilic
• Produttore/marchio commerciale: Prostak^™
• Parametri: 2.1 bar max. transmembrane pressure (30 psi) at 50-80 °C; 4.1 bar max. inlet pressure (60 psi) at 50-80 °C; 4.1 bar max. transmembrane pressure (60 psi) at 50 °C; 5.5 bar max. inlet pressure (80 psi) at 50 °C
• dilution: (concentration and clarification)
• Altezza: 12.4 cm (4.9 in.)
• Lunghezza: 38.9 cm (15.3 in.)
• Larghezza: 19.8 cm (7.8 in.)
• device size: , 20 stack
• Superficie filtrante: 1.7 m²
• membrane nominal area: 1.7
• Peso: 6.2 kg (13.7 lb)
• Matrice: Durapore^®
• Dimensione pori: 0.65 μm nominal pore size; 0.65 μm pore size
• pH: 1-11(short duration); 2-10(continuous)

Descrizione

Descrizione generale

Prostak^™ MF Module are a tangential flow filtration device in a stacked plate configuration with Type V screen open feed channel. A microporous membrane, Durapore^® polyvinylidene fluoride (PVDF), is bonded on both sides of each plate. The plates are then stacked in parallel forming stacks.

This Prostak^™ microfiltration open-channel module features a Pore Size of 0.65 μm and a filtration area of 1.7 m². SK2P446E0 is available in a 20 stack, making it applicable for bench-top, pilot, and production scale systems.

The modules can be integrity tested and steam sterilized for 20 cycles.

Prostak^™ MF modules must be used with a support holder, which controls deflection and provides sanitary fittings for connection to external piping. Sanitary gaskets supplied with the module provide a leak-free connection between the module(s) and the holder.

Applicazioni

Typical Applications
Prostak^™ microfiltration is used for separations where viscosity and suspended solids levels of the feed stream require an open feed channel. They are typically used in perfusion applications or in the clarification/harvest of:

• Mammalian, bacterial and mycelial cell suspensions
• Emulsions and colloidal suspension
• Viruses, proteins and other bio-organic macromolecular solutions
• Polysaccharides and other high viscosity solutions
• Yeast, algae, and other high solids suspensions
• Protein precipitate
• Vaccines

Caratteristiche e vantaggi

Type V screen open feed channel

Altre note

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Prefiltration Rquirements: 150 µm

Note legali

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Prostak is a trademark of Merck KGaA, Darmstadt, Germany