PCC030C10G
Capsula Pellicon® con membrana Ultracel®
pore size 30 kDa, C Screen, 1 m2 manifold with AseptiQuik® G connectors
About This Item
Prodotti consigliati
Materiali
EPDM rubber seal
PPO/PS blend housing
TPE seal
cellulose screen (Composite Regenerated)
composite regenerated cellulose (CRC) membrane
epoxy adhesive
epoxy device (Potting, BPA-free)
polyester screen
polypropylene screen
polyurethane adhesive
polyurethane device (Pottin)
Livello qualitativo
Descrizione
C Screen, 1 m2 manifold with AseptiQuik® G connectors
Sterilità
sterile; γ-irradiated
Caratteristiche
holdup volume 254 mL (in feed channel)
holdup volume 306 mL (in permeate channel)
Parametri
max. inlet pressure at 75 psi (5.1 bar) and 4-30 °C
max. transmembrane pressure at 50 psi (3.5 bar) and 4-30 °C
4-8 L/min-m2 flow rate
tecniche
ultrafiltration: suitable
capsule L × W × H
19.56 cm (7.7 in.) × 34.37 cm (13.53 in.) × 40.46 cm (15.93 in.)
Area membrana
1 m2
screen H
15.9 in. (40.5 cm)
screen L
7.7 in. (19.6 cm) , Length
screen W
13.5 in. (34.4 cm)
Impurezze
≤5 ppm Meets TOC (in retentate effluent, after a WFI flush of 20 L/m2)
Matrice
Ultracel®
Dimensione pori
30 kDa
Intervallo di pH
2-13
Raccordi
inlet/outlet connection (Feed: AseptiQuik® G Connector)
inlet/outlet connection (Permeate: AseptiQuik® G Connector)
inlet/outlet connection (Retentate: AseptiQuik® G Connector)
Temperatura di conservazione
15-25°C
Cerchi prodotti simili? Visita Guida al confronto tra prodotti
Descrizione generale
Pellicon® Capsules are ideal for the filtration of solutions that require single-use capabilities, including:
-Rapid batch turnaround for higher plant productivity
-Lower risks of product cross-contamination
-Self-contained device for increased operator safety
-Process flexibility for multi-product manufacturing facilities
-Optimum use of time and resources from minimal device preparation
Membrane
Pellicon® Capsules with Ultracel membrane are designed for excellent product retention, recovery, and high yields. Ultracel void-free composite membranes combine ultra-low protein binding, low fouling, and organic solvent resistance with superb mechanical strength.
Applicazioni
Caratteristiche e vantaggi
- Plug ′n play, holderless design - easy to install, safe to remove
- Gamma Sterilized and preseravtive-free - ready to process in minutes
- True single-use, self-contained capusle - fast, safe, and flexible batch turnaround
- Proven Ultracel® membrane and C screen - high recovery, superior mass transfer, solvent resistance
- Pellicon® TFF proven performance - true linear scalability within Pellicon® TFF families
Confezionamento
Compatibilità
Altre note
- Comprehensive documentation to support qualification, risk assessment and process optimization needs.
- Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
- Convenient 24/7 access to up-to-date product information.
Note legali
Prodotti correlati
Certificati d'analisi (COA)
Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.