CS40MS01H1

Filtri di profondità Clarisolve^®

High-density cell cultures

• Sinonimo/i: Clarisolve 40 μm Lab Scale Depth Filters, 0.014 m² (0.15 ft²)
• Codice UNSPSC: 23151806
• eCl@ss: 32031690
• NACRES: NB.24

Proprietà

• Materiali: Millistak+^® media; TPE seal; polypropylene
• Livello qualitativo: 400
• Produttore/marchio commerciale: Clarisolve^®
• Parametri: 2.1 bar max. differential pressure (30 psid) at 37 °C (Forward); 2.1 bar max. differential pressure (30 psid) at 37 °C (Maximum); 2.1 bar max. differential pressure (30 psid) at 37 °C (Reverse); 2.1 bar max. differential pressure (30 psid) at 4 °C (Forward)
• Altezza: 14 cm (5.3 in.)
• Lunghezza: 22 cm (8.5 in.)
• Larghezza: 7.4 cm (2.9 in.)
• Superficie filtrante: 0.014 m²
• Impurezze: <0.25 EU/mL (LAL test, Aqueous extraction; on filter media only)
• Carbonio Organico Totale (TOC) residuo: 0.9-1.2 μg/L
• input: sample type liquid
• Conducibilità: 0.91 – 1.29 μS/cm
• Condizioni di spedizione: ambient

Descrizione

Descrizione generale

product water; post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity.

Risultati analitici

Total organic carbon (TOC) residue: Post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. At the end of the flush, a sample was pulled for TOC typical values.

Total organic carbon (TOC) residue: TOC for 60HX media was measured at below detectable limits.

Note legali

CLARISOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, Germany

Informazioni sulla sicurezza

• Codice della classe di stoccaggio: 13 - Non Combustible Solids
• Classe di pericolosità dell'acqua (WGK): nwg
• Punto d’infiammabilità (°F): Not applicable
• Punto d’infiammabilità (°C): Not applicable