CS20MS02H1

Filtri di profondità Clarisolve^®

High-density cell cultures

• Sinonimo/i: Clarisolve 20 m Lab Scale Depth Filters, 0.027 m² (0.29 ft²)
• Codice UNSPSC: 23151806
• eCl@ss: 32031690
• NACRES: NB.24

Proprietà

• Materiali: Millistak+^® media; TPE seal; polypropylene
• Livello qualitativo: 400
• Produttore/marchio commerciale: Clarisolve^®
• Parametri: 2.1 bar max. differential pressure (30 psid) at 37 °C (Forward); 2.1 bar max. differential pressure (30 psid) at 37 °C (Maximum); 2.1 bar max. differential pressure (30 psid) at 37 °C (Reverse); 2.1 bar max. differential pressure (30 psid) at 4 °C (Forward)
• Altezza: 14 cm (5.3 in.)
• Lunghezza: 22 cm (8.5 in.)
• Larghezza: 9.4 cm (3.7 in.)
• Superficie filtrante: 0.027 m²
• Impurezze: <0.25 EU/mL (LAL test, Aqueous extraction; on filter media only)
• Carbonio Organico Totale (TOC) residuo: 1.4-2.1 μg/L
• input: sample type liquid
• Conducibilità: 0.80 – 1.59 μS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity.)
• Condizioni di spedizione: ambient

Descrizione

Descrizione generale

The CLARISOLVE^® Depth Filters are the first primary clarification offering with a gradient density structure specifically designed to the particle size distributions of pretreated feed streams. With improved volumetric capacity and reduced turbidity over currently available depth filters, the clarification step of pretreated feeds can be processed in a significantly reduced footprint without the need for a secondary stage of clarification.

A μPod scale device, the CLARISOLVE^® depth filter provides the fastest and most efficient way to clarify high-density streams and easily transfer processes from upstream to downstream without the use of centrifugation.

This CLARISOLVE^® filter has a filtration area of 0.027 m² and a Lab Scale Pod device format.

Applicazioni

High-density cell cultures

Specifiche

Filter Grade: 20MS

Nota sulla preparazione

Sterilization Method
Integrity is maintained after 2 autoclave cycles of 60 minutes at 123 °C.

Risultati analitici

Total organic carbon (TOC) residue: Post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. At the end of the flush, a sample was pulled for TOC typical values.

Note legali

CLARISOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, Germany

Informazioni sulla sicurezza

• Codice della classe di stoccaggio: 13 - Non Combustible Solids
• Classe di pericolosità dell'acqua (WGK): nwg
• Punto d’infiammabilità (°F): Not applicable
• Punto d’infiammabilità (°C): Not applicable