934135

TissueFab^® Sodium Persulfate Solution

low endotoxin

• Sinonimo/i: Sodium persulfate, SPS, SPS Crosslinker, Sodium peroxodisulfate
• Formula condensata: Na₂S₂O₈
• Numero CAS: 7775-27-1
• Peso molecolare: 238.10
• Numero MDL: MFCD00003501
• Codice UNSPSC: 12352300
• NACRES: NA.21

Proprietà

• Livello qualitativo: 100
• Temperatura di conservazione: 2-8°C
• Stringa SMILE: [Na+].[Na+].[O-]S(=O)(=O)OOS([O-])(=O)=O
• InChI: 1S/2Na.H2O8S2/c;;1-9(2,3)7-8-10(4,5)6/h;;(H,1,2,3)(H,4,5,6)/q2*+1;/p-2; CHQMHPLRPQMAMX-UHFFFAOYSA-L

Descrizione

Descrizione generale

Rutheneum (Ru) and sodium persulfate (SPS) have the ability to effectively generate free radicals in the 400-450nm visible light range, allowing for cell-friendly photo-crosslinking of a variety of hydrogels. Among the materials that can be crosslinked via this method are the natturally derived and biocompatible biomaterials silk fibroin and gelatin . These materials can be used to enhance the mechanical and rheological properties to aid the 3D bioprinting workflow.

Applicazioni

Sodium persulfate is provided at an optimized concentration for 3D bioprinting applications. It can be used to bioprint via extrusion based 3D bioprinting cell-laden hydrogels in desired shapes and without any supporting materials. Crosslinking of the 3D printed structures is done in one step using visible light. The crosslinked cell-laden bioinks can be further culutred and use for tissue engineering and regenerative medicina applications.
Low Endotoxin, low bioburden: Endotoxins have been demonstrated negatively impact cellular growth, morphology, differentiation, inflammation and protein expression. Bioburden is defined as the number of contaminated organisms found in a given amount of material. We test each lot for endotoxins as well as total bioburden (aerobic and fungal) to minimize unwanted interactions. For more information: https://www.sigmaaldrich.com/US/en/technical-documents/technical-article/microbiological-testing/pyrogen-testing/what-is-endotoxin

Note legali

Tissuefab is a registered trademark of Sigma-Aldrich Co. LLC

TISSUEFAB is a registered trademark of Merck KGaA, Darmstadt, Germany

Informazioni sulla sicurezza

• Pittogrammi: GHS03,GHS08
• Avvertenze: Danger
• Indicazioni di pericolo: H272,H317,H334
• Consigli di prudenza: P210 - P220 - P261 - P272 - P280 - P302 + P352
• Classi di pericolo: Ox. Liq. 3 - Resp. Sens. 1 - Skin Sens. 1
• Codice della classe di stoccaggio: 5.1B - Oxidizing hazardous materials
• Classe di pericolosità dell'acqua (WGK): nwg
• Punto d’infiammabilità (°F): Not applicable
• Punto d’infiammabilità (°C): Not applicable