739340
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)
0.54% in H2O, high-conductivity grade
Sinonimo/i:
Orgacon™ S305, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Numero MDL:
Codice UNSPSC:
12352103
Prodotti consigliati
Grado
high-conductivity grade
Forma fisica
liquid
contiene
1-5% Propan-2-ol
5-10% Diethylene glycol
Concentrazione
0.54% in H2O
Resistenza
<200 Ω/sq, >90% visible light transmission (40 μm wet)
Indice di rifrazione
n20/D 1.344
pH
<2.7
Viscosità
<18 cP(22 °C)
Densità
0.983 g/mL at 25 °C
Cerchi prodotti simili? Visita Guida al confronto tra prodotti
Descrizione generale
A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivityand good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.
Applicazioni
Aqueous formulation of high conductivity grade PEDOT:PSS polymer dispersion suitable for transparent conductive coatings. Includes PEDOT:PSS and surfactants.
Used in ITO-free OPV applications as a highly conductive hole transport layer. Also can be used for optical films, touch pads, touch screen displays, flexible LCDs, and e-paper applications.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Note legali
Product of Agfa-Gevaert N.V.
Orgacon is a trademark of Agfa-Gevaert N.V.
Sostituito da
N° Catalogo
Descrizione
Determinazione del prezzo
Codice della classe di stoccaggio
10 - Combustible liquids
Classe di pericolosità dell'acqua (WGK)
WGK 2
Punto d’infiammabilità (°F)
Not applicable
Punto d’infiammabilità (°C)
Not applicable
Scegli una delle versioni più recenti:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
Solar cells made from polymers containing Dithieno [3, 2-b: 2', 3'-d] pyrrole with different side chain lengths
Gong C, et al.
Solar Energy Mat. and Solar Cells, 95(3), 969-973 (2011)
Structure and electronic properties of poly(3,4-ethylenedioxythiophene) poly(styrene sulfonate) prepared under ultrasonic irradiation
Posudievsky OYu, et al.
Synthetic Metals, 195, 335-339 (2014)
SURPRISING IMPACT OF SMALL ELECTRIC AND MAGNETIC FIELDS ON CONDUCTING POLYMERS
Epstein AJ, et al.
Polymer Preprints (American Chemical Society, Division of Polymer Chemistry), 48(1), 119-119 (2007)
Mou Pal et al.
Nanoscale research letters, 7(1), 1-1 (2012-01-05)
Uniform, spherical-shaped TiO2:Eu nanoparticles with different doping concentrations have been synthesized through controlled hydrolysis of titanium tetrabutoxide under appropriate pH and temperature in the presence of EuCl3·6H2O. Through air annealing at 500°C for 2 h, the amorphous, as-grown nanoparticles could
Simple casting based fabrication of PEDOT:PSS-PVDF-ionic liquid soft actuators
Simaite A, et al.
SPIE Proc. null
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.