Pular para o conteúdo
Merck

High-sensitivity elemental ionization for quantitative detection of halogenated compounds.

The Analyst (2015-11-10)
Haopeng Wang, Carina S Minardi, Hamid Badiei, Kaveh Kahen, Kaveh Jorabchi
RESUMO

The rising importance of organohalogens in environmental, pharmaceutical, and biological applications has drawn attention to analysis of these compounds in recent years. Elemental mass spectrometry (MS) is particularly advantageous in this regard because of its ability to quantify without compound-specific standards. However, low sensitivity of conventional elemental MS for halogens has hampered applications of this powerful method in organohalogen analyses. To this end, we have developed a high-sensitivity elemental ion source compatible with widely available atmospheric-sampling mass spectrometers. We utilize a helium-oxygen plasma for atomization followed by negative ion formation in plasma afterglow, a configuration termed as plasma-assisted reaction chemical ionization (PARCI). The effect of oxygen on in-plasma and afterglow reactions is investigated, leading to fundamental understanding of ion generation processes as well as optimized operating conditions. Coupled to a gas chromatograph, PARCI shows constant ionization efficiency for F, Cl, and Br regardless of the chemical structure of the compounds. Negative ionization in the afterglow improves halide ion formation efficiency and eliminates isobaric interferences, offering sub-picogram elemental detection for F, Cl, and Br using low-resolution MS. Notably, the detection limit for F is about one order of magnitude better than other elemental MS techniques. The high sensitivity and facile adoptability of PARCI pave the way for combined elemental-molecular characterization, a comprehensive analytical scheme for rapid identification and quantification of organohalogens.

MATERIAIS
Número do produto
Marca
Descrição do produto

Sigma-Aldrich
Óxido de alumínio, activated, basic, Brockmann I
Sigma-Aldrich
Óxido de alumínio, activated, neutral, Brockmann I
Sigma-Aldrich
Óxido de alumínio, powder, 99.99% trace metals basis
Sigma-Aldrich
Óxido de alumínio, activated, acidic, Brockmann I
Sigma-Aldrich
Óxido de alumínio, powder, primarily α phase, ≤10 μm avg. part. size, 99.5% trace metals basis
Sigma-Aldrich
Óxido de alumínio, nanopowder, <50 nm particle size (TEM)
Sigma-Aldrich
Aluminum oxide, nanoparticles, <50 nm particle size (DLS), 20 wt. % in isopropanol
Sigma-Aldrich
Óxido de alumínio, Corundum, α-phase, -100 mesh
Sigma-Aldrich
Óxido de alumínio, pellets, 3 mm
Sigma-Aldrich
Óxido de alumínio, fused, powder, primarily α-phase, -325 mesh
Sigma-Aldrich
Óxido de alumínio, nanopowder, 13 nm primary particle size (TEM), 99.8% trace metals basis
Sigma-Aldrich
1H,1H,2H,2H-Perfluoro-1-decanol, 97%
Sigma-Aldrich
Óxido de alumínio, 99.997% trace metals basis
Sigma-Aldrich
Óxido de alumínio, Type WN-6, Neutral, Activity Grade Super I
Sigma-Aldrich
Óxido de alumínio, pore size 58 Å, ~150 mesh
Sigma-Aldrich
Aluminum oxide, nanoparticles, 30-60 nm particle size (TEM), 20 wt. % in H2O
Sigma-Aldrich
Decafluorobiphenyl, 99%
Sigma-Aldrich
Óxido de alumínio, fused, powder, primarily α-phase, 100-200 mesh
Sigma-Aldrich
Óxido de alumínio, single crystal substrate, <0001>
Sigma-Aldrich
Aluminum oxide, mesoporous, MSU-X (wormhole), average pore size 3.8 nm
Sigma-Aldrich
2-Fluorobenzonitrile, 98%
Sigma-Aldrich
Óxido de alumínio, activated, neutral, Brockmann I, free-flowing, Redi-Dri
Sigma-Aldrich
Óxido de alumínio, activated, acidic, Brockmann I, free-flowing, Redi-Dri