MFGB20SB3

Hydrophobic Durapore^® 0.22 µm, Millipak^® Final Fill Capsule

Millipak^® Final Fill 200, sterile; γ-irradiated

• Código UNSPSC: 23151806

Propriedades

• Materiais: polysulfone device; polysulfone support
• Nível de qualidade: 400
• Agency: meets EP 2.6.14; meets JP 4.01; meets USP 85
• esterilidade: irradiated; sterile; γ-irradiated
• linha de produto: Millipak^® Final Fill 200
• Características: hydrophilic
• fabricante/nome comercial: Millipak^®
• Parâmetros: 10 psi max. differential pressure (0.7 bar) at 25 °C (Reverse); 200 L process volume; 5.5 bar max. inlet pressure (80 psi) at 25 °C; 7.61 L/min flow rate at 1.1 bar (ΔP); 80 psi max. differential pressure (5.5 bar) at 25 °C (Forward)
• técnica(s): sterile filtration: suitable
• filter filtration area: 1000 cm²
• Impurezas: <0.25 EU/mL USP bacterial endotoxins (LAL test, per device; aqueous extraction); <0.25 EU/mL bacterial endotoxins (LAL test, per device; aqueous extraction)
• matriz: Durapore^®
• tamanho de poro: 0.22 μm pore size
• conector: (13 mm (1/2 in.) Hose Barb Inlet and Outlet)

Descrição

Descrição geral

Device Configuration: Gamma Gold Capsule

Embalagem

Double Easy-Open bag

Nota de preparo

Sterilization Method: Device integrity and retention was maintained after 3 autoclave cycles of 90 minutes at 126  °C. Devices can withstand a dose ≤40  kGy gamma exposure.

This product was manufactured with a Durapore^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b)(6), validated based on large volume parenteral specifications as detailed in USP 788 Particulate Matter in Injections

Nota de análise

Bacterial Grow-Through: Quantitative retention of 1 x 10⁷ CFU/cm² Brevundimonas diminuta ATCC^® 19146 per ASTM^® F838 methodology.

Outras notas

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer general guidelines section of user guide shipped with this product
• Storage Statement: Please refer user guide shipped with this product
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

These products are manufactured in a facility which is certified to ISO 9001:2015 Quality Management Systems.

Informações legais

ASTM is a registered trademark of American Society for Testing and Materials

ATCC is a registered trademark of American Type Culture Collection

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany