CPAFS8PRM
Kit: Progard® 3 + Millipak® 100
For use with AFS® 8/8D/16/16D systems (2003 range)
Faça loginpara ver os preços organizacionais e de contrato
About This Item
Produtos recomendados
Nível de qualidade
composição
(Polypropylene and EPDM)
embalagem
pkg of 1 kit
compatibilidade
for use with AFS®
Descrição geral
This water purification kit contains Millipak® 100 Bacteria Filter (MPGL10ZW1) and Progard® 3 Pretreatment Pack (PR0G00003).
- Millipak® filter removes bacteria from pure water before it enters the analyzer.
- The Progard® Pack pretreats water by removing large particles, organic compounds and free chlorine from tap water.
Aplicação
- The filter provides bacteria- and particulate-free water suitable for laboratory use, including clinical analyzers.
- The pretreatment pack protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation.
Características e benefícios
Millipak® 100 filter features:
Progard® 3 Pretreatment Pack features:
- 0.22 μm Durapore® filter membrane for bacteria removal.
- Low protein binding membrane yields high sample recovery with minimal loss of valuable product ensuring high-value filtration.
Progard® 3 Pretreatment Pack features:
- Polyphosphate for anti-scaling protection.
- Silver-impregnated activated carbon filter for free chlorine reduction and bacteriostatic protection.
- Depth-filtration (0.5 μm) for removal of particles and colloids.
Outras notas
Directions for Use
- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: General laboratory analysis
- Intended Use: Water purification
- Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes. Refer to the system equipment user guide section "Using the System" (available on USB key in the system box).
- Storage Statement: Store in a dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Informações legais
AFS is a registered trademark of Merck KGaA, Darmstadt, Germany
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
Código de classe de armazenamento
11 - Combustible Solids
Certificados de análise (COA)
Busque Certificados de análise (COA) digitando o Número do Lote do produto. Os números de lote e remessa podem ser encontrados no rótulo de um produto após a palavra “Lot” ou “Batch”.
Já possui este produto?
Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.
Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.
Entre em contato com a assistência técnica