Pular para o conteúdo
Merck
Todas as fotos(1)

Documentos

808156

Sigma-Aldrich

3D printing graphene ink

greener alternative
Faça loginpara ver os preços organizacionais e de contrato
Todas as fotos(1)

About This Item

Código UNSPSC:
12352103

descrição

0.12-0.15 Ω-cm (as 3D-printed fibers, not ink, 200-400 μm diameter)

forma

viscous liquid

características do produto alternativo mais ecológico

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

tamanho de partícula

1-15 nm (thick)
1-20 μm (length and width)

viscosidade

20-60 Pa.s

pb

39 °C

densidade

1.5-1.8 g/mL at 25 °C

categoria alternativa mais ecológica

, Enabling

temperatura de armazenamento

2-8°C

Descrição geral

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". 3D printable inks help to design and print more complex designs with minimum waste and it is environmentally friendly. Click here for more information.

Aplicação

  • Direct syringe extrusion into solid fibers or structures-can be extruded by hand, or by machine, from any standard syringe.
  • Dip-coating.
  • Spin-coating.
  • Casting.
  • Fusing-separately produced solid 3D printing graphene objects can be joined via application of additional ink at points of contact.
This product can be used in material extrusion 3D printing technique.

Pictogramas

Health hazardExclamation mark
GHS08,GHS07

Palavra indicadora

Danger

Classificações de perigo

Aquatic Chronic 3 - Carc. 2 - Eye Irrit. 2 - Repr. 1B - Skin Irrit. 2 - STOT SE 3

Órgãos-alvo

Central nervous system

Código de classe de armazenamento

6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects

Classe de risco de água (WGK)

WGK 3

Ponto de fulgor (°F)

Not applicable

Ponto de fulgor (°C)

Not applicable

Certificados de análise (COA)

Busque Certificados de análise (COA) digitando o Número do Lote do produto. Os números de lote e remessa podem ser encontrados no rótulo de um produto após a palavra “Lot” ou “Batch”.

Já possui este produto?

Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.

Visite a Biblioteca de Documentos

Os clientes também visualizaram

Slide 1 of 2

1 of 2

Sigma-Aldrich

Sigma-Aldrich

900960

Graphene ink for spin/spray coating photonically annealable

Graphene dispersion 10 mg/mL, dispersion in NMP

Sigma-Aldrich

803839

Graphene dispersion

Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications
Jakus A, et al.
ACS Nano, 9 (4), 4636-4648 (2015)

Artigos

3D Bioprinting: Bioink Selection Guide

Bioinks selection guide for 3D bioprinting of cells for tissues engineering applications.

3D Printing Graphene Ink: Creating Electronic and Biomedical Structures and Devices

Since its discovery little more than a decade ago,1 the two-dimensional (2D) allotrope of carbon—graphene—has been the subject of intense multidisciplinary research efforts.

Synthesis and Applications of Graphene Nanoribbons Synthesized

Synthesis and Applications of Graphene Nanoribbons Synthesized

Additive Manufacturing of Permanent Magnets

Permanent magnets are an essential technology for energy conversion. Motors and generators are used to convert energy between electrical and mechanical forms.

Ver tudo

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica