Pular para o conteúdo
Merck
Todas as fotos(3)

Documentos

773735

Sigma-Aldrich

Carbon nanotube, single-walled

(6,5) chirality, ≥95% carbon basis (≥95% as carbon nanotubes), 0.78 nm average diameter

Sinônimo(s):

CHASM™, CNT, Signis® SG65i, SWCNT, SWNT, Single wall carbon nanotube

Faça loginpara ver os preços organizacionais e de contrato
Todas as fotos(3)

About This Item

Número CAS:
308068-56-6
Código UNSPSC:
12352103
NACRES:
NA.23

descrição

G/D Ratio: ≥20 (Raman 633 nm)
Median length: 1 μm

Ensaio

≥95% carbon basis (≥95% as carbon nanotubes)

forma

powder (freeze-dried)

fabricante/nome comercial

Signis® SG65i

área da superfície

≥700 m2/g

Impurezas

≤5 wt. % Moisture content

diâmetro médio

0.78 nm

pf

3652-3697 °C (lit.)

densidade

1.7-1.9 g/cm3 at 25 °C (lit.)

densidade volumétrica

0.1 g/cm3

cadeia de caracteres SMILES

[C]

Procurando produtos similares? Visita Guia de comparação de produtos

Descrição geral

Produced using CHASM′s patented CoMoCAT™ synthesis technology, Signis® SG65i is a single-wall carbon nanotube (CNT) product uniquely enriched in semiconducting tubes, with (6,5) chirality being most abundant. Approximately 95% of the CNTs in SG65i are semiconducting, with approximately 41% of those tubes being (6,5) chirality.

Aplicação

Suitable for use in printed semiconductors, photovoltaic devices, sensors, medical research, etc.

Nota de preparo

CoMoCAT™ Catalytic Chemical Vapor Deposition (CVD) Method

Informações legais

CHASM is a trademark of Chasm Advanced Materials
CoMoCAT is a trademark of Chasm Advanced Materials
Signis is a registered trademark of Chasm Advanced Materials

Código de classe de armazenamento

11 - Combustible Solids

Classe de risco de água (WGK)

WGK 3

Ponto de fulgor (°F)

Not applicable

Ponto de fulgor (°C)

Not applicable

Certificados de análise (COA)

Busque Certificados de análise (COA) digitando o Número do Lote do produto. Os números de lote e remessa podem ser encontrados no rótulo de um produto após a palavra “Lot” ou “Batch”.

Já possui este produto?

Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.

Visite a Biblioteca de Documentos

Gabriele Selvaggio et al.
Nature communications, 11(1), 1495-1495 (2020-03-22)
Imaging of complex (biological) samples in the near-infrared (NIR) is beneficial due to reduced light scattering, absorption, phototoxicity, and autofluorescence. However, there are few NIR fluorescent materials known and suitable for biomedical applications. Here we exfoliate the layered pigment CaCuSi4O10
Robert Nißler et al.
Nanoscale, 11(23), 11159-11166 (2019-06-01)
Single-walled carbon nanotubes (SWCNTs) have unique photophysical properties and serve as building blocks for biosensors, functional materials and devices. For many applications it is crucial to use chirality-pure SWCNTs, which requires sophisticated processes. Purification procedures such as wrapping by certain
Anton V Naumov et al.
Nano letters, 9(9), 3203-3208 (2009-07-31)
A new method was used to measure the fraction of semiconducting nanotubes in various as-grown or processed single-walled carbon nanotube (SWCNT) samples. SWCNT number densities were compared in images from near-IR photoluminescence (semiconducting species) and AFM (all species) to compute
Tsukasa Takeuchi et al.
Bioconjugate chemistry, 30(5), 1323-1330 (2019-03-09)
Single-walled carbon nanotubes (SWCNTs) show strong fluorescence in the 1000-1700 nm second near-infrared (NIR-II) wavelength range and are considered promising candidates for angiographic imaging probes. Oxygen-doped SWCNTs coated with phospholipid-polyethylene glycol (o-SWCNT-PEG) show exceptional potential, as they emit fluorescence at
Yuji Matsukawa et al.
Molecules (Basel, Switzerland), 26(4) (2021-03-07)
Semiconductor single-walled carbon nanotubes (SWNTs) have unique characteristics owing to differences in the three-dimensional structure (chirality) expressed by the chiral index (n,m), and many studies on the redox characteristics of chirality have been reported. In this study, we investigated the

Artigos

CoMoCAT® Single-wall Carbon Nanotubes

The CoMoCAT® method of single-walled carbon nanotube (SWNT) synthesis yields high purity SWNTs with specific chiralities and narrow distributions of tube diameters.

Carbon Nanomaterials: Elemental Analyses and Quantification of Their Accumulation in Living Cells

Carbon nanomaterials (CNMs), such as single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNTs), and graphene (Figure 1), have diverse commercial applications including lighter and stronger composite materials, improved energy storage devices, more sensitive sensors, and smaller transistors.

Boron Nitride Nanotubes: Properties, Synthesis and Applications

Boron nitride nanotubes (BNNT) are close structural analogs of carbon nanotubes (CNT), which are high aspect ratio nanotubular material, where carbon atoms are alternately substituted by nitrogen and boron atoms.

Sorting Carbon Nanotubes and Their Biological Applications

Carbon nanotubes (CNTs) have received much attention since their discovery in 1991 by Sumio lijima1 due to their excellent mechanical, electrical, and optical properties.

Ver tudo

Protocolos

Single-Walled Carbon Nanotubes synthesized by the Super-Growth Method: Properties & Applications

Single-Walled Carbon Nanotubes synthesized by the Super-Growth Method & their properties & applications, including dispersing SGCNTs, SGCNT-polymer composites & SGCNT-metal composites are discussed.

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica