649805

Poly(3,4-ethylenedioxythiophene)-block-poly(ethylene glycol) solution

1 wt % dispersion in nitromethane, contains perchlorate as dopant

• Synonyme(s) : Aedotron^™ C-NM
• Numéro MDL: MFCD06798808
• Code UNSPSC : 12352103
• Nomenclature NACRES : NA.23

Propriétés

• Contient: perchlorate as dopant
• Niveau de qualité: 100
• Concentration: 1 wt % dispersion in nitromethane
• Résistance: 10,000-100,000 Ω/sq (spin cast thin films: typically 1-3 layers spun at 1,000 rpm)
• Travail d'extraction: 4.33 eV
• Description: 40 nm (RMS roughness spin cast thin films)
• Taille des particules: 600-1000 nm (in suspension)
• Conductivité: 0.1-5.0 S/cm (bulk)
• Densité: 1.127 g/mL at 25 °C

Description

Description générale

Aedotron^™ polymers are solvent-dispersable forms of PEDOT. These are copolymers of doped PEDOT and a flexible, soluble polymer such as poly(ethylene glycol) (PEG). These colloidal dispersions are stabilized by the highly solvated PEG chains which sterically limit the aggregation of the PEDOT blocks. Aedotron polymers are neither acidic nor corrosive, it easily disperses in polar aprotic solvents. Perchlorate-doped copolymers typically have a higher conductivity with thin films that are more transparent.

Please follow this link for Aedotron/Oligotron selection guide table.

Application

Nitromethane dispersions can be used to cast thin films on glass, ITO, silicon wafers and many polymeric substrates. Compatibility of the polymeric substrate with nitromethane should be tested in each case. Coat the substrate with a "pool" of the nitromethane dispersion. Thin transparent films are typically spun at 1000 RPM or higher speeds, but more conducting films can be obtained at lower speeds. A single layer spun at 1000 RPM is typically 75 nm thick.

Conducting polymer. Useful as anti-static layers, hole-transport layers in OLED′s and various organic electronics applications (flexible circuits, capacitors, batteries).

Attention

Store this product at room temperature (do not refrigerate or freeze). Some settling will normally occur. Agitate, sonicate, and filter prior to use. A plug of glass wool in a pipette can be used for easy filtration. The shelf life of this product will vary depending on how it is stored and handled. Product should be discarded if heavy aggregation occurs, or if sonication / filtering are inadequate to produce a good casting solution.

Informations légales

Aedotron is a trademark of TDA Research, Inc.

Informations sur la sécurité

• Pictogrammes: GHS02,GHS07,GHS08
• Mention d'avertissement: Warning
• Mentions de danger: H226 - H302 + H332 - H351 - H361d
• Conseils de prudence: P202 - P210 - P233 - P301 + P312 - P304 + P340 + P312 - P308 + P313
• Classification des risques: Acute Tox. 4 Inhalation - Acute Tox. 4 Oral - Carc. 2 - Flam. Liq. 3 - Repr. 2
• Code de la classe de stockage: 3 - Flammable liquids
• Classe de danger pour l'eau (WGK): WGK 2
• Point d'éclair (°F): 96.8 °F - closed cup
• Point d'éclair (°C): 36 °C - closed cup