Direkt zum Inhalt
Merck

139386

Sigma-Aldrich

Hexan

≥99%, suitable for GC/MS, suitable for EPA 1613, ReagentPlus®

Synonym(e):

n-Hexan

Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise


About This Item

Lineare Formel:
CH3(CH2)4CH3
CAS-Nummer:
Molekulargewicht:
86.18
Beilstein:
1730733
EG-Nummer:
MDL-Nummer:
UNSPSC-Code:
12352001
PubChem Substanz-ID:
NACRES:
NA.06

product name

Hexan, ReagentPlus®, ≥99%

Agentur

suitable for EPA 1613

Qualitätsniveau

Dampfdichte

~3 (vs air)

Dampfdruck

256 mmHg ( 37.7 °C)
5.2 psi ( 37.7 °C)
~132 mmHg ( 20 °C)

Produktlinie

ReagentPlus®

Assay

≥99%

Form

liquid

Selbstzündungstemp.

453 °F

Expl.-Gr.

7.7 %

Methode(n)

GC/MS: suitable

Brechungsindex

n20/D 1.375 (lit.)

pH-Wert

7

bp

69 °C (lit.)

mp (Schmelzpunkt)

−95 °C (lit.)

Löslichkeit

water: insoluble

Dichte

0.659 g/mL at 25 °C (lit.)

SMILES String

CCCCCC

InChI

1S/C6H14/c1-3-5-6-4-2/h3-6H2,1-2H3

InChIKey

VLKZOEOYAKHREP-UHFFFAOYSA-N

Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich

Allgemeine Beschreibung

Hexane is an alkane and exists in 5 structural isomeric forms, i.e. hexane, isohexane, 3-methylpentane, neohexane and 2,3-dimethylbutane. It can be obtained from petroleum by distillation. It can also be produced by electrolyzing the potassium butyrate solution. It is widely employed organic solvent for the dissolution and isolation of fats and oils.

Anwendung

Hexane may be used in the following studies:
  • Preparation of graft-copolymer chains of poly-(dimethylsiloxane)-g-poly(methyl methacrylate).
  • GC/MS (Gas Chromatography/Mass Spectrometry) characterization of essential oils isolated from various origins.
  • As solvent for the preparation of samples and standards during chromatographic studies.

Hexane may be used as a solvent in the detection of rubrene, using normal phase high performance liquid chromatography. It may also be used as an extraction solvent to concentrate the analytes like synthetic cannabinoids of the aminoalkylindole type and methanandamide in serum, followed by separation using liquid chromatography coupled with tandem-mass spectrometry.

Rechtliche Hinweise

ReagentPlus is a registered trademark of Merck KGaA, Darmstadt, Germany

Signalwort

Danger

Gefahreneinstufungen

Aquatic Chronic 2 - Asp. Tox. 1 - Flam. Liq. 2 - Repr. 2 - Skin Irrit. 2 - STOT RE 2 Inhalation - STOT SE 3

Zielorgane

Central nervous system, Nervous system

Lagerklassenschlüssel

3 - Flammable liquids

WGK

WGK 3

Flammpunkt (°F)

-7.6 °F - closed cup

Flammpunkt (°C)

-22 °C - closed cup


Analysenzertifikate (COA)

Suchen Sie nach Analysenzertifikate (COA), indem Sie die Lot-/Chargennummer des Produkts eingeben. Lot- und Chargennummern sind auf dem Produktetikett hinter den Wörtern ‘Lot’ oder ‘Batch’ (Lot oder Charge) zu finden.

Besitzen Sie dieses Produkt bereits?

In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.

Die Dokumentenbibliothek aufrufen

Development and validation of a liquid chromatography?tandem mass spectrometry method for the quantitation of synthetic cannabinoids of the aminoalkylindole type and methanandamide in serum and its application to forensic samples
Dresen S, et al.
Journal of Mass Spectrometry : Jms, 46(2), 163-171 (2011)
Occurrence, mechanisms and analytical applications of electrogenerated chemiluminescence. A review
Knight.WA and Greenway.MG et al.
Analyst, 119(5), 879- 890 (1994)
G Di Nicola et al.
Journal of chromatography. A, 1190(1-2), 120-126 (2008-03-18)
Biodiesel (a mixture of fatty acid esters) is normally analyzed using gas chromatography/flame ionization detection, as specified by the ASTM D6584 and EN14105 standards. This paper proposes a binary gradient method for analyzing biodiesel mixtures using non-aqueous reverse phase HPLC
Comparative evaluation of 11 essential oils of different origin as functional antioxidants, antiradicals and antimicrobials in foods.
Sacchetti G, et al.
Food Chemistry, 91(4), 621-632 (2005)
Ali Mohraz et al.
Langmuir : the ACS journal of surfaces and colloids, 21(12), 5298-5306 (2005-06-01)
The development of model materials and image processing methods to directly visualize and quantify colloidal rod assembly by means of confocal laser scanning microscopy (CLSM) is reported. Monodisperse fluorescent colloidal rods are prepared by the uniaxial extensional deformation of sterically

Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..

Setzen Sie sich mit dem technischen Dienst in Verbindung.