SLFG033

Millex^® hydrophobic PTFE syringe filter

pore size 0.2 μm, diam. 33 mm, non-sterile

• Synonym(e): 0.2 μm PTFE syringe filter, Fluoropore^® PTFE syringe filter, Millex-FH syringe filter, disposable syringe filter, syringe filter
• UNSPSC-Code: 41104922

Eigenschaften

• Materialien: PTFE membrane; polypropylene housing
• Sterilität: non-sterile
• Produktlinie: Millex^®
• Qualität: MQ400
• Hersteller/Markenname: Millex^®
• Parameter: at ≥0.8 bar and 23 °C (bubble point; air with methanol); max. inlet pressure (125 psi); max. pressure at 8.6 bar; 45 °C temperature (maximum)
• Methode(n): UHPLC: suitable; analytical sample preparation: suitable; gas filtration: suitable; vent filtration: suitable
• Höhe: 27 mm
• Durchmesser: 33 mm
• Filterfläche: 4.5 cm²
• Volumen: 100 mL
• Farbe: red
• Porengröße: 0.2 μm
• Aufnahme: sample type organic solution(s); gas
• Fitting: (Female Luer-Lok inlet,; male Luer-slip outlet)

Beschreibung

Allgemeine Beschreibung

Replaces SLFG025 25mm 0.20 μm hydrophobic PTFE Millex syringe filter. SLFG033 provides faster filtration of samples in organic solvents as compared to 25mm 0.20 μm hydrophobic PTFE syringe filters.

Sonstige Hinweise

For general laboratory use only

Rechtliche Hinweise

Fluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany

Millex is a registered trademark of Merck KGaA, Darmstadt, Germany