SK2P242E9

Prostak^™ MF-Modul

pore size 0.45 μm

• Synonym(e): Prostak^™ MF Module 0.45μm 20 stack 1.7 m²
• UNSPSC-Code: 23151806
• eCl@ss: 32031623

Eigenschaften

• Materialien: PVDF ; silicone gasket
• Qualitätsniveau: 400
• Leistungsmerkmale: hydrophilic
• Hersteller/Markenname: Prostak^™
• Parameter: 2.1 bar max. transmembrane pressure (30 psi) at 50-80 °C; 4.1 bar max. inlet pressure (60 psi) at 50-80 °C; 4.1 bar max. transmembrane pressure (60 psi) at 50 °C; 5.5 bar max. inlet pressure (80 psi) at 50 °C
• dilution: (concentration and clarification)
• Höhe: 12.4 cm (4.9 in.)
• Länge: 38.9 cm (15.3 in.)
• Breite: 19.8 cm (7.8 in.)
• device size: , 20 stack
• Filtrationsfläche: 1.7 m²
• membrane nominal area: 1.7
• Gewicht: 6.2 kg (13.7 lb)
• Matrix: Durapore^®
• Porengröße: 0.45 μm nominal pore size; 0.45 μm pore size
• pH-Wert: 1-11(short duration); 2-10(continuous)

Beschreibung

Allgemeine Beschreibung

Prostak^™ MF Module are a tangential flow filtration device in a stacked plate configuration with Type V screen open feed channel. A microporous membrane, Durapore^® polyvinylidene fluoride (PVDF), is bonded on both sides of each plate. The plates are then stacked in parallel forming stacks.

This Prostak^™ microfiltration open-channel module features a Pore Size of 0.45 μm and a filtration area of 1.7 m². SK2P242E9 is available in a 20 stack, making it applicable for bench-top, pilot, and production scale systems.

The modules can be integrity tested and steam sterilized for 20 cycles.

Prostak^™ MF modules must be used with a support holder, which controls deflection and provides sanitary fittings for connection to external piping. Sanitary gaskets supplied with the module provide a leak-free connection between the module(s) and the holder.

Anwendung

Typical Applications
Prostak^™ microfiltration is used for separations where viscosity and suspended solids levels of the feed stream require an open feed channel. They are typically used in perfusion applications or in the clarification/harvest of:

• Mammalian, bacterial and mycelial cell suspensions
• Emulsions and colloidal suspension
• Viruses, proteins and other bio-organic macromolecular solutions
• Polysaccharides and other high viscosity solutions
• Yeast, algae, and other high solids suspensions
• Protein precipitate
• Vaccines

Leistungsmerkmale und Vorteile

Type V screen open feed channel

Sonstige Hinweise

Diese Produkte werden in einem Werk hergestellt, das den GMP-Richtlinien der FDA entspricht.

Prefiltration Rquirements: 150 µm

Rechtliche Hinweise

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Prostak is a trademark of Merck KGaA, Darmstadt, Germany