MT30014096
Mettler-Toledo InLab® Expert Pro-ISM electrode
ideal for use in suspensions
Synonym(e):
combination electrode, pH electrode with integrated temperature sensor
About This Item
Empfohlene Produkte
Materialien
PEEK shaft
glass, U membrane
Beschreibung
BNC/Cinch (RCA) connector.
Reference electrolyte XEROLYT™ Polymer
Reference system ARGENTHAL™
With ISM
designed for use with SevenCompact™ 220, SevenGo Duo pro™ SG68, SG78 and SG98 and SevenGo Duo™ SG23
Hersteller/Markenname
Mettler-Toledo 30014096
Temperaturmessbereich
0-100 °C
L × Durchm.
120 mm × 12 mm
Kabel L
1.8 m
pH-Bereich
0-14
Allgemeine Beschreibung
Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides.
The InLab® Expert Pro-ISM electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® Expert Pro-ISM electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination.
The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block. In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness. Service life and measurement accuracy are further improved by the ARGENTHAL™ reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures.
The Mettler Toledo meters have the ability to automatically recognize ISM sensors upon connection, transfer calibration data to and from the sensor etc.
- Intelligent sensor management (ISM®)
- High grade plastic shaft (PEEK)
- Polymer electrolyte XEROLYT™
- Open junction
- ARGENTHAL™ reference
- Integrated temperature sensor
Rechtliche Hinweise
Analysenzertifikate (COA)
Suchen Sie nach Analysenzertifikate (COA), indem Sie die Lot-/Chargennummer des Produkts eingeben. Lot- und Chargennummern sind auf dem Produktetikett hinter den Wörtern ‘Lot’ oder ‘Batch’ (Lot oder Charge) zu finden.
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
Kunden haben sich ebenfalls angesehen
Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..
Setzen Sie sich mit dem technischen Dienst in Verbindung.