Direkt zum Inhalt
Merck

719781

Sigma-Aldrich

Kohlenstoff-Nanofasern

greener alternative

graphitized (iron-free), composed of conical platelets, D × L 100 nm × 20-200 μm

Synonym(e):

Kohlenstoff Nanofasern, konisch

Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise


About This Item

Empirische Formel (Hill-System):
C
Molekulargewicht:
12.01
MDL-Nummer:
UNSPSC-Code:
12352103
PubChem Substanz-ID:
NACRES:
NA.23

Qualitätsniveau

Form

powder

Grünere Alternativprodukt-Eigenschaften

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

T × L

100 nm × 20-200 μm

Oberflächenbereich

24 m2/g

Verunreinigungen

iron-free
<100 ppm Iron content

Durchschnittlicher Durchmesser

130 nm

Porengröße

0.075 cm3/g average pore volume
124 Å average pore diameter

mp (Schmelzpunkt)

3652-3697 °C

Dichte

1.9 g/mL at 25 °C

Schüttdichte

0.5‑3.5 lb/cu.ft

Grünere Alternativprodukt-Kategorie

InChI

1S/C

InChIKey

OKTJSMMVPCPJKN-UHFFFAOYSA-N

Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich

Allgemeine Beschreibung

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Carbon nanofibers are ideal materials due to its impressive material properties such as mechanical strength, thermal and electrical conductivity. Click here for more information.

Anwendung

Carbon nanofibers (CNFs) are carbon based nanostructures that can be used for a variety of applications such as tissue engineering, lithium based batteries, supercapacitors, and solar desalinations.

Angaben zur Herstellung

Produced by Floating Catalyst Vapor-Grown Method

Rechtliche Hinweise

Product of Pyrograf® Products Inc.
Pyrograf is a registered trademark of Applied Sciences, Inc.

Piktogramme

Exclamation mark

Signalwort

Warning

H-Sätze

Gefahreneinstufungen

Eye Irrit. 2 - STOT SE 3

Zielorgane

Respiratory system

Lagerklassenschlüssel

11 - Combustible Solids

WGK

WGK 3

Flammpunkt (°F)

Not applicable

Flammpunkt (°C)

Not applicable


Hier finden Sie alle aktuellen Versionen:

Analysenzertifikate (COA)

Lot/Batch Number

Die passende Version wird nicht angezeigt?

Wenn Sie eine bestimmte Version benötigen, können Sie anhand der Lot- oder Chargennummer nach einem spezifischen Zertifikat suchen.

Besitzen Sie dieses Produkt bereits?

In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.

Die Dokumentenbibliothek aufrufen

Effect of carbon nanofibers on electrode performance of symmetric supercapcitors with composite alpha-MnO2 nanorods
Rao TP, et al.
Journal of alloys and compounds, 789(14), 518-527 (2019)
Electrically conductive chitosan/carbon scaffolds for cardiac tissue engineering
Martins AM, et al.
Biomacromolecules, 15(2), 635-643 (2014)
CNFs/S 1-x Se x Composites as Promising Cathode Materials for High-Energy Lithium-Sulfur Batteries
Pandey GP, et al.
MRS Advances, 4(14), 821-828 (2019)
Novel draw solution for forward osmosis based solar desalination
Amjad M, et al.
Applied Energy, 230(14), 220-231 (2018)
Antoine P Pagé et al.
PloS one, 10(7), e0132062-e0132062 (2015-07-15)
The objectives of this study were to uncover Salix purpurea-microbe xenobiotic degradation systems that could be harnessed in rhizoremediation, and to identify microorganisms that are likely involved in these partnerships. To do so, we tested S. purpurea's ability to stimulate

Artikel

Pyrograf®-III vapor-grown carbon nanofibers are within the class of materials termed multi-walled carbon nanotubes (MWCNTs), and are produced by the floating catalyst method.

Composite materials that traditionally incorporate micron scale reinforcements in a bulk matrix offer opportunities to tailor material properties such as hardness, tensile strength, ductility, density, thermal and electrical conductivity, and wear resistance.

3D printing is a type of additive manufacturing that can be used to rapidly fabricate components with highly customizable geometries.

Verwandter Inhalt

Tissue engineering fabricates tissues cultures from scaffolds, living cells, and biologically active molecules by simulating the microenvironment of the body to repair or replace damaged tissue.

Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..

Setzen Sie sich mit dem technischen Dienst in Verbindung.