Direkt zum Inhalt
Merck
Alle Fotos(2)

Key Documents

View All Documentation

719811

Sigma-Aldrich

Kohlenstoff-Nanofasern

greener alternative

pyrolitically stripped, platelets(conical), >98% carbon basis, D × L 100 nm × 20-200 μm

Synonym(e):

Kohlenstoff Nanofasern, konisch

Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise
Alle Fotos(2)

About This Item

Empirische Formel (Hill-System):
C
Molekulargewicht:
12.01
MDL-Nummer:
MFCD00133992
UNSPSC-Code:
12352103
PubChem Substanz-ID:
329763682
NACRES:
NA.23

Biologische Quelle

platelets (conical)

Qualitätsniveau

200

Assay

>98% carbon basis

Form

powder

Grünere Alternativprodukt-Eigenschaften

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

T × L

100 nm × 20-200 μm

Oberflächenbereich

54 m2/g

Verunreinigungen

<14,000 ppm Iron content

Durchschnittlicher Durchmesser

130 nm

Porengröße

0.12 cm3/g average pore volume
89.3 Å average pore diameter

mp (Schmelzpunkt)

3652-3697 °C

Dichte

1.9 g/mL at 25 °C

Schüttdichte

0.5‑3.5 lb/cu.ft

Grünere Alternativprodukt-Kategorie

Enabling,

InChI

1S/C

InChIKey

OKTJSMMVPCPJKN-UHFFFAOYSA-N

Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich

Verwandte Kategorien

Allgemeine Beschreibung

This grade of vapor-grown carbon nanofiber (VGCF) is recommended for imparting electrostatic dissipative properties (106 - 1010 ohm-cm), and increasing the mechanical properties of most polymers matrices.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Carbon nanofibers are ideal materials due to its impressive material properties such as mechanical strength, thermal and electrical conductivity. Click here for more information.

Anwendung

Adsorption of monoclonal CD3 antibodies on the modified surfaces of pyrolytically stripped carbon nanofibers were studied.

Angaben zur Herstellung

Produced by Floating Catalyst Vapor-Grown Method

Rechtliche Hinweise

Product of Pyrograf® Products Inc.
Pyrograf is a registered trademark of Applied Sciences, Inc.

Piktogramme

Exclamation mark
GHS07

Signalwort

Warning

H-Sätze

H319,H335

Gefahreneinstufungen

Eye Irrit. 2 - STOT SE 3

Zielorgane

Respiratory system

Lagerklassenschlüssel

11 - Combustible Solids

WGK

WGK 3

Flammpunkt (°F)

Not applicable

Flammpunkt (°C)

Not applicable

Hier finden Sie alle aktuellen Versionen:

Analysenzertifikate (COA)

Lot/Batch Number
MKCL6863
MKCL1828
MKCF6102
MKBW6009V
MKBW6011V

Die passende Version wird nicht angezeigt?

Wenn Sie eine bestimmte Version benötigen, können Sie anhand der Lot- oder Chargennummer nach einem spezifischen Zertifikat suchen.

Suche nach COA

Besitzen Sie dieses Produkt bereits?

In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.

Die Dokumentenbibliothek aufrufen

Kunden haben sich ebenfalls angesehen

Slide 1 of 2

1 of 2

Kohlenstoff nanopowder, &lt;100&#160;nm particle size (TEM)

Sigma-Aldrich

633100

Kohlenstoff

Kohlenstoffnanoröhrchen, mehrwandig flake of bundled CNTs, &gt;95% carbon basis, O.D. × L 10-40&#160;nm × 0.5-1.5&#160;mm

Sigma-Aldrich

901002

Kohlenstoffnanoröhrchen, mehrwandig

Effect of carbon nanofibre structure on the binding of antibodies
Naguib NN, et al.
Nanotechnology, 16(4) (2005)
Antoine P Pagé et al.
PloS one, 10(7), e0132062-e0132062 (2015-07-15)
The objectives of this study were to uncover Salix purpurea-microbe xenobiotic degradation systems that could be harnessed in rhizoremediation, and to identify microorganisms that are likely involved in these partnerships. To do so, we tested S. purpurea's ability to stimulate
Catharina Vendl et al.
The Journal of experimental biology, 218(Pt 21), 3425-3434 (2015-11-06)
Fundamental differences in methane (CH4) production between macropods (kangaroos) and ruminants have been suggested and linked to differences in the composition of the forestomach microbiome. Using six western grey kangaroos (Macropus fuliginosus) and four red kangaroos (Macropus rufus), we measured
Svenja T Lohner et al.
The ISME journal, 8(8), 1673-1681 (2014-05-23)
Direct, shuttle-free uptake of extracellular, cathode-derived electrons has been postulated as a novel mechanism of electron metabolism in some prokaryotes that may also be involved in syntrophic electron transport between two microorganisms. Experimental proof for direct uptake of cathodic electrons
Wojciech Filipiak et al.
Journal of breath research, 9(1), 016004-016004 (2015-01-06)
Existing methods for the early detection of infections in mechanically ventilated (MV) patients at intensive care units (ICUs) are unsatisfactory. Here we present an exploratory study assessing the feasibility of breath VOC analyses for the non-invasive detection of pathogens in
Alle zugehörigen Dokumente anzeigen

Artikel

Carbon Nanofiber Applications & Properties

Pyrograf®-III vapor-grown carbon nanofibers are within the class of materials termed multi-walled carbon nanotubes (MWCNTs), and are produced by the floating catalyst method.

Lightweight Metal Matrix Nanocomposites - Stretching the Boundaries of Metals

Composite materials that traditionally incorporate micron scale reinforcements in a bulk matrix offer opportunities to tailor material properties such as hardness, tensile strength, ductility, density, thermal and electrical conductivity, and wear resistance.

3D Printing of Carbon Fiber-Reinforced Composites

3D printing is a type of additive manufacturing that can be used to rapidly fabricate components with highly customizable geometries.

Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..

Setzen Sie sich mit dem technischen Dienst in Verbindung.