Saltar al contenido
MilliporeSigma
Todas las fotos(1)

Documentos clave

Ver Toda la documentación

2637501

Supelco

SPME/Direct

pkg of 1 ea

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

UNSPSC Code:
12000000

packaging

pkg of 1 ea

L × O.D. × I.D.

78.5 mm × 6.5 mm × 0.75 mm

¿Está buscando productos similares? Visita Guía de comparación de productos

General description

The liner is the second most important part of the inlet. It is the centrepiece of the inlet system, basically a glass tube between the septum and the column, where the sample is evaporated and brought into the gas phase. Split/splitless inlet allows fast sample introduction and vaporization which is highly advantageous for small sample sizes. Though the injection modes for both split and splitless are carried out on the same inlet, there are certain differences like a splitless injection involves the complete introduction of the sample into the column whereas in a split injection, the sample is divided in the inlet as a result only part of the sample is introduced in the column.
Deactivated (silanized) glass inlet liner for capillary injection ports.
  • Fits Agilent (5890, 6890, and 7890)
  • Fits Finnigan (9001GCQ)
  • Fits Varian (CP-1177 Injector)

Storage Class

13 - Non Combustible Solids

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

Lo sentimos, en este momento no disponemos de COAs para este producto en línea.

Si necesita más asistencia, póngase en contacto con Atención al cliente

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Ratnasekhar Ch et al.
Food chemistry, 334, 127553-127553 (2020-07-21)
Rice is one of the most important cereals for human nutrition and is a basic staple food for half of the global population. The assessment of rice geographical origins in terms of its authenticity is of great interest to protect
Fire Debris Analysis.
Stauffer E
Science, 249-252 (2007)

Artículos

The Effect of Container Materials on Production of Light Induced Off-Flavors in Milk – A Study Using SPME-GC-MS

Various plastics used as barriers to the production of off-flavors in light exposed milk were examined using HS-SPME with a new Carboxen®/PDMS coated Nitinol fiber followed by GC-MS analysis allowing detection of low MW analytes at levels <1 ng/mL.

GC/MS/MS Analysis of Bisphenol A (BPA) in a Fruit Flavored Energy Drink on the SLB-PAHms Column After SPME Using an Overcoated SPME Fiber

Bisphenol A (BPA) plastic is controversial in food and beverage containers. This study demonstrates SPME of BPA from an energy drink using an overcoated PDMS/DVB fiber, followed by GC/MS/MS analysis using SLB-PAHms GC Column.

Multiclass Pesticide Analysis of Soy Milk Using a Matrix-Compatible SPME Fiber

Pesticide analysis, SPME Fiber, supelco spme fiber, direct immersion spme, pesticide analysis methods, pesticide analysis by gc-ms, DI-SPME, overcoated SPME, overcoated fibers, soy milk analysis

Protocolos

Headspace SPME-GC/MS Analysis of Terpenes in Hops and Cannabis

Terpenes are present in essential oils derived from plants and often impart characteristic aromas to the plant or its oil. The SPME is a convenient, efficient, and easy to automate sample preparation technology for analyzing the terpene/terpenoid profile of these plant materials.

Analysis of Residual Solvents in Hemp Extract by Headspace SPME-GC/MS

The use of solid phase microextraction (SPME) allowed for the straightforward, fast, sensitive, and accurate GC/MS determination of the residual solvent content of spiked and unspiked samples of hemp extract.

Analysis of Bisphenol A in Food by Solid Phase Microextraction Using an Overcoated Fiber

Bisphenol A (BPA) is suspected to be an endocrine disruptor. Regulations on specific migration limits (SML) from food contact materials are getting tighter (EU 2018/213) requiring more sensitive determinations. An overcoated SPME fiber provides the durability necessary for direct immersion into foods such as canned soup and pumpkin, allowing for low level analysis of BPA via SPME-GC-MS/MS.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico