PCC030C30E

Pellicon^® Capsule with Ultracel^® Membrane

30 kDa, C Screen, 3 m² manifold extender with AseptiQuik^® L connectors

• UNSPSC Code: 41104903

Propiedades

• material: EPDM rubber seal; PPO/PS blend (Core); PPO/PS blend housing; TPE seal; composite regenerated cellulose (CRC) membrane; epoxy adhesive; polyester screen; polypropylene screen; polyurethane adhesive
• Quality Level: 400
• sterility: sterile; γ-irradiated
• product line: Pellicon^®
• storage condition: room temperature (15-30°C)
• parameter: 4-8 L/min-m² flow rate; 50 psi pressure (3.5 bar) at 4-30 °C (Forward Transmembrane Pressure (TMP)); 60 psi max. pressure (4.1 bar) at 4-30 °C (Maximum Inlet Pressure)
• technique(s): ultrafiltration: suitable
• H: 46.9 cm (18.5 in.)
• L: 45.9 cm (18.1 in.)
• filtration area: 3 m²
• screen size: , Type C screen (coarse screen)
• size: 48.2 cm (19.0 in.)
• volume: 1288 mL , in feed channel; 1627 mL , in permeate channel
• impurities: ≤5 ppm TOC ( in retentate effluent, after a WFI flush of 20 L/m²)
• matrix: Ultracel^®
• pore size: 30 kDa
• pH range: 2-13
• fitting: inlet/outlet connection (Feed: AseptiQuik^® L Connector); inlet/outlet connection (Permeate: AseptiQuik^® L Connector); inlet/outlet connection (Retentate: AseptiQuik^® L Connector)

Descripción

General description

The Pellicon^® Capsule is the first of its kind -- a true single-use TFF device that comes ready to process in minutes. Self-contained, it employs an easy-to-use, holderless format and is supplied sterilized by irradiation.

Application

Concentration, Diafiltration, Buffer exchange, Protein purification

Features and Benefits

Plug ′n play, holderless design - easy to install, safe to remove
Gamma Sterilized and preseravtive-free - ready to process in minutes
True single-use, self-contained capusle - fast, safe, and flexible batch turnaround
Proven Ultracel^® membrane and C screen - high recovery, superior mass transfer, solvent resistance
Pellicon^® TFF proven performance - true linear scalability within Pellicon^® TFF families

Packaging

The manifold assembly is inserted into a polyethylene foam frame and then double bagged and vacuum sealed. The double-bagged assembly is placed within a second foam frame and individually boxed (qty 1 per box). Packaged assemblies are palletized.

Other Notes

The Emprove^® Program complements the product portfolio through
Comprehensive documentation to support qualification, risk assessment and process optimization needs.
Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
Convenient 24/7 access to up-to-date product information.

Legal Information

AseptiQuik is a registered trademark of Colder Products Company

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany