MFHL02GH3

Durapore^® 0.45 µm, Millipak^® Final Fill Capsule

Millipak^® Final Fill 20

• Sinónimos: Durapore^® 0.45 μm Millipak^® Final Fill 20 Gamma-compatible , HB/HB
• UNSPSC Code: 23151806

Propiedades

• material: PVDF membrane (hydrophilic); polysulfone housing; polysulfone support; silicone O-ring
• sterility: irradiated; sterile; γ-irradiated (compatible)
• sterilization compatibility: gamma compatible
• product line: Millipak^® Final Fill 20
• feature: hydrophilic
• dilution: (Prefilters and Bioburden Filtration)
• filtration area: 0.01 m²
• matrix: Durapore^®
• pore size: 0.45 μm pore size
• fitting: 6 mm (1/4 in.) inlet/outlet hose barb

Descripción

Features and Benefits

Sterilization Method: Device integrity and retention was maintained after 3 autoclave cycles of 90 minutes at 126 °C. Devices can withstand a dose ?40 kGy gamma exposure.

Packaging

3 Qty/Pk

Preparation Note

This product was manufactured with a Durapore^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
These products are manufactured in a facility which is certified to ISO 9001:2015 Quality Management Systems.

Other Notes

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer general guidelines section of user guide shipped with this product
• Storage Statement: Please refer user guide shipped with this product
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

Legal Information

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany