1.14416
Sulfide Test
colorimetric, 0.02-0.25 mg/L (S2-), for use with MCOLORTEST®
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
UNSPSC Code:
41116116
Productos recomendados
specific analyte(s)
sulfide
Quality Level
measuring range
0.02-0.25 mg/L (S2-)
compatibility
for use with MCOLORTEST®
detection method
colorimetric
storage temp.
15-25°C
Categorías relacionadas
General description
Method: colorimetric with color card and comparator block with long test tubes 0.02-0.04-0.06-0.08-0.10-0.13-0.16-0.20-0.25 mg/l S MQuant®
The MQuant® Sulfide test (formally MColortest®) can be used for the determination of sulfide in e.g.
Method
In aqueous solutions of sulfides a pH-dependent equilibrium exists between dissolved hydrogen sulfide (H2S), hydrogen sulfide ions (HS-), and sulfide ions (S2-). In the acidic range, in which practically only dissolved hydrogen sulfide is present, this reacts with dimethyl-p-phenylenediamine and iron(III) ions to form methylene blue. The sulfide concentration is measured semiquantitatively by visual comparison of the color of the measurement solution with the color fields of a color card. The unique brilliance of the print and their fine color graduation allow precise analyses, even at the lower end of the concentration range.
Due to the long test tubes a sensitive measurement range can be covered.
Using the refill pack 1.18468 containing all the reagents, the original test kit can be used for a very long time, making it a particularly economical and ecological system.
- Groundwater and surface water
- Drinking water and mineral water
- Waters from aquaculture
- Wastewater
- Soils after appropriate sample pretreatment
Method
In aqueous solutions of sulfides a pH-dependent equilibrium exists between dissolved hydrogen sulfide (H2S), hydrogen sulfide ions (HS-), and sulfide ions (S2-). In the acidic range, in which practically only dissolved hydrogen sulfide is present, this reacts with dimethyl-p-phenylenediamine and iron(III) ions to form methylene blue. The sulfide concentration is measured semiquantitatively by visual comparison of the color of the measurement solution with the color fields of a color card. The unique brilliance of the print and their fine color graduation allow precise analyses, even at the lower end of the concentration range.
Due to the long test tubes a sensitive measurement range can be covered.
Using the refill pack 1.18468 containing all the reagents, the original test kit can be used for a very long time, making it a particularly economical and ecological system.
Legal Information
MCOLORTEST is a registered trademark of Merck KGaA, Darmstadt, Germany
MQUANT is a registered trademark of Merck KGaA, Darmstadt, Germany
signalword
Danger
hcodes
Hazard Classifications
Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A
Storage Class
8B - Non-combustible, corrosive hazardous materials
wgk_germany
WGK 1
flash_point_f
Not applicable
flash_point_c
Not applicable
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Protocolos
Preparation of a standard solution for Sulfide
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico