Saltar al contenido
MilliporeSigma
Todas las fotos(1)

Key Documents

901971

Sigma-Aldrich

SunTronic® silver nanoparticle ink for inkjet printing

sintering temperature: 150-250 °C

Sinónimos:

Ag ink, Conductive ink, Silver ink, SunTronic®EMD5730

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Fórmula empírica (notación de Hill):
Ag
Peso molecular:
107.87
UNSPSC Code:
12352103
NACRES:
NA.23

description

Sintering temperature: 150-250 °C for 10 – 60 min
Solid content: 40%
Volume Resistivity: 5 – 30 uΩ.cm

form

liquid

surface tension

28-31 dyn/cm

viscosity

11-13 cP (Brookfield)

storage temp.

2-8°C

¿Está buscando productos similares? Visita Guía de comparación de productos

General description

SunTronic EMD5730 is formulated for inkjet printing of conductive traces onto a variety of substrates. EMD5730 is a solvent-based silver nanoparticle ink which demonstrates superior conductivity, stable jetting performance and adhesion to ITO coated glass.
EMD5730 can be used in the manufacture of touch panel displays, printed RFID antennae, smart cards, sensors, security labels, touch switches and other printed electronics applications.

Application

SunTronic® silver nanoparticle ink for inkjet printing (SunTronic® EMD5730) is a 3D additive printing technology that is used in a variety of applications such as flexible microsystems, and electronics. It is printed on a liquid crystal polymeric substrate for the formation of a low cost, adaptable tooling for effective deposition of a wide range of materials.

Caution

Printing
EMD5730 is supplied as ready-to-use solvent based inks, and can be printed on various deposition printers and jetted on through various piezo DOD inkjet printheads suitable for solvent based inks, although full printhead compatibility will need to be verified in each case.
Sintering:
Sintering conditions may change for different ink film thicknesses. Typical sintering temperature may range from 150-250°C depending on temperature tolerance of the substrate. Sintering time may range from 10-30 minutes. Electrical Resistance may be reduced with higher sintering temperature and/or longer sintering times.
Storage at a cool room temperature 10-15°C is recommended. Refrigeration can be used but agitated to assure proper dispersion is recommended.

Legal Information

SunTronic is a registered trademark of Sun Chemical, Inc.

signalword

Danger

Hazard Classifications

Acute Tox. 4 Oral - Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2 - Flam. Liq. 2 - STOT RE 2 Oral

target_organs

Kidney

Storage Class

3 - Flammable liquids

wgk_germany

WGK 3

flash_point_f

71.6 °F

flash_point_c

22 °C

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCP0654
MKCN3017
MKCL9398

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 1

1 of 1

Conductive silver printing ink, resistivity 5-6 Ω cm

Sigma-Aldrich

791873

Conductive silver printing ink, resistivity 5-6 Ω cm

Study of inkjet-printed serpentine structure on flexible substrates deformed over sculptured surfaces
Bower IA, et al.
Flexible and Printed Electronics (2020)
Additively Manufactured mm-Wave Multichip Modules With Fully Printed``Smart''Encapsulation Structures
He X, et al.
IEEE Transactions on Components, Hybrids, and Manufacturing (2019)

Artículos

Advancements in the Fabrication of Integrated Organic Electronics

Professor Tokito and Professor Takeda share their new materials, device architecture design principles, and performance optimization protocols for printed and solution-processed, low-cost, highly flexible, organic electronic devices.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico